Trouble disconnecting camera cable in 2011 Macbook Pro 13 inch

[FortyOunce]

I'm trying to get the logic board out, but I can't seem to get the camera cable disconnected from it. Seems in there pretty tight, and I don't want to break it by pulling too hard. There's a bit of paste around it but I think that's only holding the socket in, not the cable. Anyone have a trick for this?

(early 2011 Macbook Pro 13 inch A1278)

 

[chscag]

Check with the instructions for removing the camera and cable at www.ifixit.com. Make sure you look up the instructions for your model MacBook Pro.

 

[FortyOunce]

Never mind, I got it by gently wiggling it back and forth for a minute. Took some patience and care, but I got it!