- Joined
- Oct 13, 2018
- Messages
- 7
- Reaction score
- 0
- Points
- 1
- Location
- Upstate NY
- Your Mac's Specs
- MacPro5,1: Mojave, 8GB, 1TB, 4-core Xeon | MacBookAir4,2: High Sierra, 2GB, 64GB, Intel i5
Hi,
I have a mid-2010 Mac Pro 8-core that I got from a friend today. I picked it up at 3:00PM-ish, powered it on at 3:30-4PM, and then turned it off and went to work for 5:30PM. I just got home about two hours ago and went to go turn it on. The power button does nothing; no lights, no sounds, nothing. When I press the DIAG button, the yellow/amber LED comes on and shows the PSU trickle power is fine (5V STBY). My Mac Pro doesn't have an SMC_RST button near the DIAG LED button like some manuals say... is this normal? I've tried every possible trick/advice I could find online that didn't require me to press key combinations at startup (because it won't turn on). Any suggestions would be greatly appreciated.
I have a mid-2010 Mac Pro 8-core that I got from a friend today. I picked it up at 3:00PM-ish, powered it on at 3:30-4PM, and then turned it off and went to work for 5:30PM. I just got home about two hours ago and went to go turn it on. The power button does nothing; no lights, no sounds, nothing. When I press the DIAG button, the yellow/amber LED comes on and shows the PSU trickle power is fine (5V STBY). My Mac Pro doesn't have an SMC_RST button near the DIAG LED button like some manuals say... is this normal? I've tried every possible trick/advice I could find online that didn't require me to press key combinations at startup (because it won't turn on). Any suggestions would be greatly appreciated.