- Joined
- Oct 19, 2011
- Messages
- 13
- Reaction score
- 0
- Points
- 1
Hello everyone,
I am new to this forum so forgive me if this has been asked before. I have searched but I can't find an answer to my problem anywhere.
Here is the scenario:
I have a Macbook 3,1 Late 2007 edition with 2GB RAM and a 250GB HDD, CPU Intel Core 2 Duo 2.2Ghz. I bought it used and I bought a non-Apple Magsafe adapter. All was fine for months but now for some odd reason it reboots itself shortly after I login and it only happens when it is plugged in with the magsafe adapter. It does this from MAC OS X and Windows 7 on my BOOTCAMP partition.
If it runs on the battery, it has NO problems and it stays on until the battery is depleted.
What I have tried:
I tried to reset the PRAM no success.
I tried to reset the SMC by pulling the battery out and holding the power button for 5 seconds no success.
Thinking that it was a bad power adapter, I borrowed another one from a friend and no success. Problem still persists.
The only thing I have done last was to upgrade the hard drive from the factory default 160GB 5400RPM to a 250GB 7200RPM.
I have also tried to download the latest SMC firmware but all of them show a message "It is not needed on this computer" when I try to install.
Any other ideas what else it could be? It is driving me nuts!!
Thank you for all your help.
Joe Matarazz
I am new to this forum so forgive me if this has been asked before. I have searched but I can't find an answer to my problem anywhere.
Here is the scenario:
I have a Macbook 3,1 Late 2007 edition with 2GB RAM and a 250GB HDD, CPU Intel Core 2 Duo 2.2Ghz. I bought it used and I bought a non-Apple Magsafe adapter. All was fine for months but now for some odd reason it reboots itself shortly after I login and it only happens when it is plugged in with the magsafe adapter. It does this from MAC OS X and Windows 7 on my BOOTCAMP partition.
If it runs on the battery, it has NO problems and it stays on until the battery is depleted.
What I have tried:
I tried to reset the PRAM no success.
I tried to reset the SMC by pulling the battery out and holding the power button for 5 seconds no success.
Thinking that it was a bad power adapter, I borrowed another one from a friend and no success. Problem still persists.
The only thing I have done last was to upgrade the hard drive from the factory default 160GB 5400RPM to a 250GB 7200RPM.
I have also tried to download the latest SMC firmware but all of them show a message "It is not needed on this computer" when I try to install.
Any other ideas what else it could be? It is driving me nuts!!
Thank you for all your help.
Joe Matarazz