- Joined
- Sep 6, 2014
- Messages
- 1
- Reaction score
- 0
- Points
- 1
Hi,
I have an iPad 2 which was dropped and the touchscreen stopped working. I replaced the digitizer but the problem still remains. The digitizer connectors on the logic board seem fine, so I think there is another problem with the logic board.
If I was to replace the logic board with a fully functioning one, would you expect the problem to be fixed?
Is there anything else which may be causing the problem?
Thanks for your help,
Joel
I have an iPad 2 which was dropped and the touchscreen stopped working. I replaced the digitizer but the problem still remains. The digitizer connectors on the logic board seem fine, so I think there is another problem with the logic board.
If I was to replace the logic board with a fully functioning one, would you expect the problem to be fixed?
Is there anything else which may be causing the problem?
Thanks for your help,
Joel