- Joined
- May 25, 2008
- Messages
- 2
- Reaction score
- 0
- Points
- 1
I've been trying to install leopard + open_suse + vista on a Intel Macbook
pro, and when i get to vista installation the setup doesn't recognize any
partition where vista may be installed....
sda
1- rEFIt Partition
2- Mac OS
3- Suse
4- Vista
Note: I get to the last topic but than
Vista installation the setup doesn't recognize any partition where vista
may be installed....
Can anyone help me please .. .
Thkx
Frederico
-----------------""-------------""-------------
I - folowed Ivan N. Zlatev BLoG
http://i-nz.net/2007/05/14/apple-mac-triple-boot-howto/
1 - Partitioning
Boot from your Mac OS X CD 1 and use Disk Utility from the menu on top to
create one partition for Mac OS X, one Unix type partition and one FAT32
type partition. It appears that it is crucial to have the Windows partition
as the last one, else Vista will complain and won’t even install and
Windows XP will install, but will throw missing hal.dll error and won’t
boot.
2 - Install Mac OS X
Install Mac OS X and update it to the latest version. Reboot and install
rEFIt. Reboot and use the sync tool (called “Partition Tool” in the
menu) in the rEFIt menu to sync MBR to GPT.
3 - Install Windows Vista (setup NTFS partition)
In Vista’s setup select the FAT32 partition, format it and install there.
After the first reboot during the installation use rEFIt sync tool again.
This is just to get the NTFS partition in place. Do not finish off the
installation now, but rather procceed to the Linux installation. Windows
won’t be able to boot after the sync anyway.
4 - Install Linux (openSUSE)
Crucial elements during the installation of openSUSE before the first
reboot:
* Install Linux (yes, everything) on the single UNIX type partition.
Use custom partitioning to format the UNIX type partition to ext3 and set
mount point to /. Do not create a swap partition and do not even think
about resizing partitions.
* Set the boot loader to LILO, because GRUB will fail to install.
* Install the boot loader in the boot record for the partition. REFIt
can boot it fine and also the master boot record will be free for Windows
later on.
* Remove the Windows entry from the lilo menu, because it causes
LILO’s installation to fail.
Unfortunatly for unknown reasons to me after the first reboot during the
installation the MBR partitioning table will be gone, so one has to use
rEFIt to resync GPT and MBR. This of course will break lilo’s previous
setup, so we have to reinstall it before continuing the installation. This
can be done by boot from the openSUSE cd/dvd again and once the setup has
loaded Ctrl + Fx to a terminal. From that point on we have to mount the
partition where we have Linux installed and rerun lilo:
mkdir /media/suse;
mount /dev/sda3 /media/suse
mount --bind /dev /media/suse/dev
chroot /media/suse
lilo -v
Reboot and resync GPT/MBR once more (so that rEFIT sets proper partition
types) and then reboot for the last time. You should see OS X, Windows
(won’t boot) and Linux icons in the rEFIt menu now. Select the Linux one
and finish your openSUSE installation.
5 - Install Windows Vista
Run the Windows Vista installation from the start (again by formatting the
partition) to end now. Do not sync MBR/GPT after!
pro, and when i get to vista installation the setup doesn't recognize any
partition where vista may be installed....
sda
1- rEFIt Partition
2- Mac OS
3- Suse
4- Vista
Note: I get to the last topic but than
Vista installation the setup doesn't recognize any partition where vista
may be installed....
Can anyone help me please .. .
Thkx
Frederico
-----------------""-------------""-------------
I - folowed Ivan N. Zlatev BLoG
http://i-nz.net/2007/05/14/apple-mac-triple-boot-howto/
1 - Partitioning
Boot from your Mac OS X CD 1 and use Disk Utility from the menu on top to
create one partition for Mac OS X, one Unix type partition and one FAT32
type partition. It appears that it is crucial to have the Windows partition
as the last one, else Vista will complain and won’t even install and
Windows XP will install, but will throw missing hal.dll error and won’t
boot.
2 - Install Mac OS X
Install Mac OS X and update it to the latest version. Reboot and install
rEFIt. Reboot and use the sync tool (called “Partition Tool” in the
menu) in the rEFIt menu to sync MBR to GPT.
3 - Install Windows Vista (setup NTFS partition)
In Vista’s setup select the FAT32 partition, format it and install there.
After the first reboot during the installation use rEFIt sync tool again.
This is just to get the NTFS partition in place. Do not finish off the
installation now, but rather procceed to the Linux installation. Windows
won’t be able to boot after the sync anyway.
4 - Install Linux (openSUSE)
Crucial elements during the installation of openSUSE before the first
reboot:
* Install Linux (yes, everything) on the single UNIX type partition.
Use custom partitioning to format the UNIX type partition to ext3 and set
mount point to /. Do not create a swap partition and do not even think
about resizing partitions.
* Set the boot loader to LILO, because GRUB will fail to install.
* Install the boot loader in the boot record for the partition. REFIt
can boot it fine and also the master boot record will be free for Windows
later on.
* Remove the Windows entry from the lilo menu, because it causes
LILO’s installation to fail.
Unfortunatly for unknown reasons to me after the first reboot during the
installation the MBR partitioning table will be gone, so one has to use
rEFIt to resync GPT and MBR. This of course will break lilo’s previous
setup, so we have to reinstall it before continuing the installation. This
can be done by boot from the openSUSE cd/dvd again and once the setup has
loaded Ctrl + Fx to a terminal. From that point on we have to mount the
partition where we have Linux installed and rerun lilo:
mkdir /media/suse;
mount /dev/sda3 /media/suse
mount --bind /dev /media/suse/dev
chroot /media/suse
lilo -v
Reboot and resync GPT/MBR once more (so that rEFIT sets proper partition
types) and then reboot for the last time. You should see OS X, Windows
(won’t boot) and Linux icons in the rEFIt menu now. Select the Linux one
and finish your openSUSE installation.
5 - Install Windows Vista
Run the Windows Vista installation from the start (again by formatting the
partition) to end now. Do not sync MBR/GPT after!