- Joined
- May 31, 2007
- Messages
- 538
- Reaction score
- 0
- Points
- 16
- Location
- Florida
- Your Mac's Specs
- C2D 27" W/ MAGIC MOUSE,iPhone 3GS
I recently purchased a Imac G5 that is only a year old.the Imac has given me the message with a grey screen saying that it needs to be restarted.here is the log file that it gives once checking the error report:
Unresolved kernel trap(cpu 0): 0x300 - Data access DAR=0x0000000080001513 PC=0x00000000000A41A4
Latest crash info for cpu 0:
Exception state (sv=0x3BF28C80)
PC=0x000A41A4; MSR=0x00009030; DAR=0x80001513; DSISR=0x00200000; LR=0x000232E8; R1=0x21CEBE60; XCP=0x0000000C (0x300 - Data access)
Backtrace:
0x000232A8 0x000ABCAC 0x49777352
backtrace terminated - frame not mapped or invalid: 0xBFFF60C0
Proceeding back via exception chain:
Exception state (sv=0x3BF28C80)
previously dumped as "Latest" state. skipping...
Exception state (sv=0x3BC8F280)
PC=0x9000B348; MSR=0x0200F930; DAR=0x0181D000; DSISR=0x42000000; LR=0x9000B29C; R1=0xBFFF60C0; XCP=0x00000030 (0xC00 - System call)
Kernel version:
Darwin Kernel Version 8.10.0: Wed May 23 16:50:59 PDT 2007; root:xnu-792.21.3~1/RELEASE_PPC
panic(cpu 0 caller 0xFFFF0003): 0x300 - Data access
Latest stack backtrace for cpu 0:
Backtrace:
0x000952D8 0x000957F0 0x00026898 0x000A8004 0x000AB980
Proceeding back via exception chain:
Exception state (sv=0x3BF28C80)
PC=0x000A41A4; MSR=0x00009030; DAR=0x80001513; DSISR=0x00200000; LR=0x000232E8; R1=0x21CEBE60; XCP=0x0000000C (0x300 - Data access)
Backtrace:
0x000232A8 0x000ABCAC 0x49777352
backtrace terminated - frame not mapped or invalid: 0xBFFF60C0
Exception state (sv=0x3BC8F280)
PC=0x9000B348; MSR=0x0200F930; DAR=0x0181D000; DSISR=0x42000000; LR=0x9000B29C; R1=0xBFFF60C0; XCP=0x00000030 (0xC00 - System call)
Kernel version:
Darwin Kernel Version 8.10.0: Wed May 23 16:50:59 PDT 2007; root:xnu-792.21.3~1/RELEASE_PPC
Model: PowerMac12,1, BootROM 5.2.6f1, 1 processors, PowerPC G5 (3.0), 1.9 GHz, 1.5 GB
Graphics: ATI Radeon X600 Pro, ATY,RV370, PCI, 128 MB
Memory Module: DIMM0/BUILT-IN, 512 MB, built-in, built-in
Memory Module: DIMM1/J6700, 1 GB, DDR2 SDRAM, PC2-4200U-444
AirPort: AirPort Extreme, 405.1 (3.90.34.0.p18)
Bluetooth: Version 1.7.14f14, 2 service, 1 devices, 1 incoming serial ports
Network Service: AirPort, AirPort, en1
PCI Card: ATY,RV370, Display, PCI-E
Serial ATA Device: WDC WD1600JS-40MVB1, 149.05 GB
Parallel ATA Device: MATSHITADVD-R UJ-846, 807.15 MB
USB Device: Hub, Up to 480 Mb/sec, 500 mA
USB Device: Built-in iSight, Micron, Up to 480 Mb/sec, 500 mA
USB Device: IR Receiver, Apple Computer, Inc., Up to 12 Mb/sec, 500 mA
USB Device: Hub in Apple Pro Keyboard, Mitsumi Electric, Up to 12 Mb/sec, 500 mA
USB Device: Apple Pro Keyboard, Mitsumi Electric, Up to 12 Mb/sec, 250 mA
USB Device: Bluetooth HCI, Up to 12 Mb/sec, 500 mA
USB Device: Microsoft Wireless Optical Mouse® 1.0A, Microsoft, Up to 1.5 Mb/sec, 500 mA
Also if nothing is pressed when the reboot screen comes on then the fan will run extremely loud.Also if nothing is pressed when the reboot screen comes on then the fan will run extremely loud.
All this started happening AFTER i did the updates.Before i did the updates it did not give me any grey screen.i have also done the hardware test as well.everything passed.anyone have a solution for this problem?
I have also checked to see if this imac falls under recall act but i missed the boat by a digit or 2.Anyone with help on this will be greatly appreciative.
Unresolved kernel trap(cpu 0): 0x300 - Data access DAR=0x0000000080001513 PC=0x00000000000A41A4
Latest crash info for cpu 0:
Exception state (sv=0x3BF28C80)
PC=0x000A41A4; MSR=0x00009030; DAR=0x80001513; DSISR=0x00200000; LR=0x000232E8; R1=0x21CEBE60; XCP=0x0000000C (0x300 - Data access)
Backtrace:
0x000232A8 0x000ABCAC 0x49777352
backtrace terminated - frame not mapped or invalid: 0xBFFF60C0
Proceeding back via exception chain:
Exception state (sv=0x3BF28C80)
previously dumped as "Latest" state. skipping...
Exception state (sv=0x3BC8F280)
PC=0x9000B348; MSR=0x0200F930; DAR=0x0181D000; DSISR=0x42000000; LR=0x9000B29C; R1=0xBFFF60C0; XCP=0x00000030 (0xC00 - System call)
Kernel version:
Darwin Kernel Version 8.10.0: Wed May 23 16:50:59 PDT 2007; root:xnu-792.21.3~1/RELEASE_PPC
panic(cpu 0 caller 0xFFFF0003): 0x300 - Data access
Latest stack backtrace for cpu 0:
Backtrace:
0x000952D8 0x000957F0 0x00026898 0x000A8004 0x000AB980
Proceeding back via exception chain:
Exception state (sv=0x3BF28C80)
PC=0x000A41A4; MSR=0x00009030; DAR=0x80001513; DSISR=0x00200000; LR=0x000232E8; R1=0x21CEBE60; XCP=0x0000000C (0x300 - Data access)
Backtrace:
0x000232A8 0x000ABCAC 0x49777352
backtrace terminated - frame not mapped or invalid: 0xBFFF60C0
Exception state (sv=0x3BC8F280)
PC=0x9000B348; MSR=0x0200F930; DAR=0x0181D000; DSISR=0x42000000; LR=0x9000B29C; R1=0xBFFF60C0; XCP=0x00000030 (0xC00 - System call)
Kernel version:
Darwin Kernel Version 8.10.0: Wed May 23 16:50:59 PDT 2007; root:xnu-792.21.3~1/RELEASE_PPC
Model: PowerMac12,1, BootROM 5.2.6f1, 1 processors, PowerPC G5 (3.0), 1.9 GHz, 1.5 GB
Graphics: ATI Radeon X600 Pro, ATY,RV370, PCI, 128 MB
Memory Module: DIMM0/BUILT-IN, 512 MB, built-in, built-in
Memory Module: DIMM1/J6700, 1 GB, DDR2 SDRAM, PC2-4200U-444
AirPort: AirPort Extreme, 405.1 (3.90.34.0.p18)
Bluetooth: Version 1.7.14f14, 2 service, 1 devices, 1 incoming serial ports
Network Service: AirPort, AirPort, en1
PCI Card: ATY,RV370, Display, PCI-E
Serial ATA Device: WDC WD1600JS-40MVB1, 149.05 GB
Parallel ATA Device: MATSHITADVD-R UJ-846, 807.15 MB
USB Device: Hub, Up to 480 Mb/sec, 500 mA
USB Device: Built-in iSight, Micron, Up to 480 Mb/sec, 500 mA
USB Device: IR Receiver, Apple Computer, Inc., Up to 12 Mb/sec, 500 mA
USB Device: Hub in Apple Pro Keyboard, Mitsumi Electric, Up to 12 Mb/sec, 500 mA
USB Device: Apple Pro Keyboard, Mitsumi Electric, Up to 12 Mb/sec, 250 mA
USB Device: Bluetooth HCI, Up to 12 Mb/sec, 500 mA
USB Device: Microsoft Wireless Optical Mouse® 1.0A, Microsoft, Up to 1.5 Mb/sec, 500 mA
Also if nothing is pressed when the reboot screen comes on then the fan will run extremely loud.Also if nothing is pressed when the reboot screen comes on then the fan will run extremely loud.
All this started happening AFTER i did the updates.Before i did the updates it did not give me any grey screen.i have also done the hardware test as well.everything passed.anyone have a solution for this problem?
I have also checked to see if this imac falls under recall act but i missed the boat by a digit or 2.Anyone with help on this will be greatly appreciative.