- Joined
- Jan 24, 2005
- Messages
- 240
- Reaction score
- 2
- Points
- 18
- Location
- Lyons, Ohio
- Your Mac's Specs
- My setup: 17in SD iMac G5, 1GB RAM & 12in iBook, 1.5GB RAM (Both computers standard config.)
This is the "panic report" i got after i rebooted the computer.
panic(cpu 0 caller 0x0090D75C): transfer buffer poorly linked
Latest stack backtrace for cpu 0:
Backtrace:
0x00095564 0x00095A7C 0x0002683C 0x0090D75C 0x0090D930 0x002CE10C 0x002CCFD4 0x000A9694
Kernel loadable modules in backtrace (with dependencies):
com.apple.ATIRadeon9700(4.0.2)@0x908000
dependency: com.apple.iokit.IOPCIFamily(1.6)@0x452000
dependency: com.apple.iokit.IOGraphicsFamily(1.4)@0x8a4000
dependency: com.apple.iokit.IONDRVSupport(1.4)@0x8c8000
Proceeding back via exception chain:
Exception state (sv=0x4451FA00)
PC=0x00000000; MSR=0x0000D030; DAR=0x00000000; DSISR=0x00000000; LR=0x00000000; R1=0x00000000; XCP=0x00000000 (Unknown)
Kernel version:
Darwin Kernel Version 8.1.0: Tue May 10 18:16:08 PDT 2005; root:xnu-792.1.5.obj~4/RELEASE_PPC
Model: PowerMac8,2, BootROM 5.2.5f1, 1 processors, PowerPC G5 (3.0), 1.8 GHz, 2 GB
Graphics: ATI Radeon 9600, ATY,RV351, AGP, 128 MB
Memory Module: DIMM0/J4000, 1 GB, DDR SDRAM, PC3200U-30440
Memory Module: DIMM1/J4001, 1 GB, DDR SDRAM, PC3200U-30440
AirPort: AirPort Extreme, 3.6f2 (3.90.34.0.p3)
Modem: Jump, , V.92, Version 1.0,
Bluetooth: Version 1.6.0f2, 2 service, 1 devices, 1 incoming serial ports
Network Service: Built-in Ethernet, Ethernet, en0
Serial ATA Device: WDC WD1600JD-40HBC0, 149.05 GB
Parallel ATA Device: MAT****ACD-RW CW-8124,
USB Device: Bluetooth HCI, , Up to 12 Mb/sec, 500 mA
USB Device: Hub in Apple Pro Keyboard, Mitsumi Electric, Up to 12 Mb/sec, 500 mA
USB Device: Apple Optical USB Mouse, Logitech, Up to 1.5 Mb/sec, 100 mA
USB Device: Apple Pro Keyboard, Mitsumi Electric, Up to 12 Mb/sec, 250 mA
USB Device: MP760, Canon, Up to 480 Mb/sec, 500 mA
I have a 17in iMac with combo (the newest model). I sent a report ot apple so...
I am sure that it is not an application because i have not install any in the last week and i just had the Kernel Panic about 5 minutes ago. It is not the ram either because that was installed when i bought the computer at the begining of May.
Well, if anyone has some suggestions please feel free to post. It would be greatly appreciated!!!
Thanks
I am going to run the Hardware test now and see what happens.
panic(cpu 0 caller 0x0090D75C): transfer buffer poorly linked
Latest stack backtrace for cpu 0:
Backtrace:
0x00095564 0x00095A7C 0x0002683C 0x0090D75C 0x0090D930 0x002CE10C 0x002CCFD4 0x000A9694
Kernel loadable modules in backtrace (with dependencies):
com.apple.ATIRadeon9700(4.0.2)@0x908000
dependency: com.apple.iokit.IOPCIFamily(1.6)@0x452000
dependency: com.apple.iokit.IOGraphicsFamily(1.4)@0x8a4000
dependency: com.apple.iokit.IONDRVSupport(1.4)@0x8c8000
Proceeding back via exception chain:
Exception state (sv=0x4451FA00)
PC=0x00000000; MSR=0x0000D030; DAR=0x00000000; DSISR=0x00000000; LR=0x00000000; R1=0x00000000; XCP=0x00000000 (Unknown)
Kernel version:
Darwin Kernel Version 8.1.0: Tue May 10 18:16:08 PDT 2005; root:xnu-792.1.5.obj~4/RELEASE_PPC
Model: PowerMac8,2, BootROM 5.2.5f1, 1 processors, PowerPC G5 (3.0), 1.8 GHz, 2 GB
Graphics: ATI Radeon 9600, ATY,RV351, AGP, 128 MB
Memory Module: DIMM0/J4000, 1 GB, DDR SDRAM, PC3200U-30440
Memory Module: DIMM1/J4001, 1 GB, DDR SDRAM, PC3200U-30440
AirPort: AirPort Extreme, 3.6f2 (3.90.34.0.p3)
Modem: Jump, , V.92, Version 1.0,
Bluetooth: Version 1.6.0f2, 2 service, 1 devices, 1 incoming serial ports
Network Service: Built-in Ethernet, Ethernet, en0
Serial ATA Device: WDC WD1600JD-40HBC0, 149.05 GB
Parallel ATA Device: MAT****ACD-RW CW-8124,
USB Device: Bluetooth HCI, , Up to 12 Mb/sec, 500 mA
USB Device: Hub in Apple Pro Keyboard, Mitsumi Electric, Up to 12 Mb/sec, 500 mA
USB Device: Apple Optical USB Mouse, Logitech, Up to 1.5 Mb/sec, 100 mA
USB Device: Apple Pro Keyboard, Mitsumi Electric, Up to 12 Mb/sec, 250 mA
USB Device: MP760, Canon, Up to 480 Mb/sec, 500 mA
I have a 17in iMac with combo (the newest model). I sent a report ot apple so...
I am sure that it is not an application because i have not install any in the last week and i just had the Kernel Panic about 5 minutes ago. It is not the ram either because that was installed when i bought the computer at the begining of May.
Well, if anyone has some suggestions please feel free to post. It would be greatly appreciated!!!
Thanks
I am going to run the Hardware test now and see what happens.