- Joined
- Jan 24, 2011
- Messages
- 87
- Reaction score
- 0
- Points
- 6
- Location
- New York City
- Your Mac's Specs
- Late 2010 Mac Pro 5,1 with 3.33Ghz 6-core, and 16GB RAM
HI Folks,
So I recently replaced the Logic Board on my 2010 Non-Thurnderbolt 27" Cinema Display. After install, I downloaded the EDID Reset Tool. However, when I run the tool, the "Reset EDID" button is grayed out and will not let me click it. I've tried unplugging / re-plugging the display but no change. As a result, there is still no brightness control, no USB, and no camera. Audio controls are working and the display is working.
Would appreciate any input on what I should do.
Thanks,
Paras.
So I recently replaced the Logic Board on my 2010 Non-Thurnderbolt 27" Cinema Display. After install, I downloaded the EDID Reset Tool. However, when I run the tool, the "Reset EDID" button is grayed out and will not let me click it. I've tried unplugging / re-plugging the display but no change. As a result, there is still no brightness control, no USB, and no camera. Audio controls are working and the display is working.
Would appreciate any input on what I should do.
Thanks,
Paras.
