- Joined
- Jan 24, 2011
- Messages
- 87
- Reaction score
- 0
- Points
- 6
- Location
- New York City
- Your Mac's Specs
- Late 2010 Mac Pro 5,1 with 3.33Ghz 6-core, and 16GB RAM
Hi folks... I have an A1316 Apple 27" Cinema Display connected to a 2010 Mac Pro 5,1. We recently had a power surge and the Display no longer responds in any way. Both the Pro and the Display were in the same APS Surge Protector and the Pro works fine... I am able to login to it remotely via laptop... but the Display does nothing, no response whatsoever. I've unplugged it, re-plugged it... nothing. It is no longer under AppleCare, so I have opened it but do not see any obvious signs of destruction. Interestingly, I did find a ball of solder that was loose and fell out, but cannot locate where it may have come from. I have opened the display before with success on replacing the All-In-One cable and the display has been full operational until now.
Any advice on how to troubleshoot and rectify the issue? I don't have the pin-outs on the PSB, etc.
Thanks, in advance.
Any advice on how to troubleshoot and rectify the issue? I don't have the pin-outs on the PSB, etc.
Thanks, in advance.