Reply to thread

Message: <blockquote data-quote="zacster" data-source="post: 1288927" data-attributes="member: 17931">Ram is on the bottom.  There are 2 screws on either side of the center that hold the memory access cover, and 2 levers inside that pull the memory out.  I find that pulling the system forward so the bottom is over the edge of the table makes it easy to try different combinations of sticks and slots or you can lay it down.  One thing to consider is that the memory might be OK but one slot or the other may be bad.  That's the situation I'm in.  I get white panic flashing when I use the DIMM0 slot.</blockquote>