D
Dark79
Guest
Ok, I've been always been a PC guy, but decided I'd venture out and check out Macs. I bought a used B&W G3 off eBay and I'm having fun with it. So much in fact that I think my next machine will be a Mac. Though it's going to be a while before I can buy a new PowerMac so I'm wondering if it's worth trying to upgrade my G3 or if I should look for a used G4 this time around.
My G3 specs are: 400Mhz, 832MB RAM, 6GB HD, 32GB HD. I'm fine as far as RAM goes, but I really need to get rid of the old 5400RPM hard drives and upgrade the processor so that I can decently run OSX (I have it installed but mostly use OS9 since OSX runs so slow).
I have a spare Western Digital hard drive (200GB 7200RPM 8MB cache) that I can put in but I'll need a PCI ATA controller to be able to access the full 200GB - roughly $80
I'd like to upgrade the processor with a SonnetTech 800Mhz G4 zif - roughly $280
I'm kinda wary of dropping close to $400 on an old machine. Would the HD upgrade alone give me that much of a performance boost?
I'd really like to get a 933Mhz Quicksilver G4 but they're still around the $900 range on eBay. Actually I wouldn't mind getting a dual 2.5Ghz G5 but I don't think I want to try my hand at financing one
So what do you guys think? I'm new to Macs so if you veterans could help me out before I spend money on a system that's probably not going to be worth my time/money upgrading, that'd be great
My primary use for this computer is design work (photoshop, illustrator, etc). I'd like to dabble in video editing sometime in the future but it's not really a priority right now.
Thanks in advance
My G3 specs are: 400Mhz, 832MB RAM, 6GB HD, 32GB HD. I'm fine as far as RAM goes, but I really need to get rid of the old 5400RPM hard drives and upgrade the processor so that I can decently run OSX (I have it installed but mostly use OS9 since OSX runs so slow).
I have a spare Western Digital hard drive (200GB 7200RPM 8MB cache) that I can put in but I'll need a PCI ATA controller to be able to access the full 200GB - roughly $80
I'd like to upgrade the processor with a SonnetTech 800Mhz G4 zif - roughly $280
I'm kinda wary of dropping close to $400 on an old machine. Would the HD upgrade alone give me that much of a performance boost?
I'd really like to get a 933Mhz Quicksilver G4 but they're still around the $900 range on eBay. Actually I wouldn't mind getting a dual 2.5Ghz G5 but I don't think I want to try my hand at financing one
So what do you guys think? I'm new to Macs so if you veterans could help me out before I spend money on a system that's probably not going to be worth my time/money upgrading, that'd be great
My primary use for this computer is design work (photoshop, illustrator, etc). I'd like to dabble in video editing sometime in the future but it's not really a priority right now.
Thanks in advance