Hey People
Im new here..
i have a bit of a problem..
my problem is that the logic board in my power mac g5 dual..( i dont know if its a dual 2.0 or 2.3 or even the 2.7 ) ( i was given it by my brother who found it on his rounds..) i would look at the sticker at the bottom just inside the door.. but there is no sticker..
i cant start it up as both processor boards are Buggered..
i can give you details about what i know so far about it
it has a 600w power unit
a delphi cooling unit..
the logic board has the number 820-1592-A ( i seen on many sites that sell logic boards with this number that the dual 2.7 can go on this board - Is this Correct? )
the Processor boards have the number 820-1621-A
160Gb Hard Disk 7200rpm
its got the original ram of 2X 256mb = 512mb
and the number on the bottom of the unit says A1044
I have 2 Questions now i said all that..
1 Can Anyone tell me what Spec i have as im not sure if i got a (had) a faster processor then the 2.0Ghz
2 Can Anyone also tell me if the Logic Board with part number 820-1592-A can take the Dual 2.5Ghz, Dual 2.7 or even better the Dual Quad 2.5Ghz ?
Your Help will be very Grateful..
Thank you in Advance for your help
Chris
Im new here..
i have a bit of a problem..
my problem is that the logic board in my power mac g5 dual..( i dont know if its a dual 2.0 or 2.3 or even the 2.7 ) ( i was given it by my brother who found it on his rounds..) i would look at the sticker at the bottom just inside the door.. but there is no sticker..
i cant start it up as both processor boards are Buggered..
i can give you details about what i know so far about it
it has a 600w power unit
a delphi cooling unit..
the logic board has the number 820-1592-A ( i seen on many sites that sell logic boards with this number that the dual 2.7 can go on this board - Is this Correct? )
the Processor boards have the number 820-1621-A
160Gb Hard Disk 7200rpm
its got the original ram of 2X 256mb = 512mb
and the number on the bottom of the unit says A1044
I have 2 Questions now i said all that..
1 Can Anyone tell me what Spec i have as im not sure if i got a (had) a faster processor then the 2.0Ghz
2 Can Anyone also tell me if the Logic Board with part number 820-1592-A can take the Dual 2.5Ghz, Dual 2.7 or even better the Dual Quad 2.5Ghz ?
Your Help will be very Grateful..
Thank you in Advance for your help
Chris