Reply to thread

Message

<blockquote data-quote="Collin Bl" data-source="post: 1618256" data-attributes="member: 95994">Just to toss another aspect out there as it were. Had been operating very happily on 10.8 for some time and decided that perhaps it was time to move to Mavericks. Did a bootable back up and stopped some 3rd party software loading and did the upgrade. All looked good until i tried to do what i had done daily for entire time on 10.8 viz, stretch a spreadsheet right across the 27 iMac to edge of 20 philips monitor and surprise, surprise, all the portion on the 20 just faded out and i could not see it.After a couple of repeat efforts was left with the choice - try and troubleshoot and perhaps upgrade from iWork 09 ( and have other potential unknown issues crop up ) or revert back to 10.8.In the end i did the 2.5 hours deal of reverting ( including the recovery disk ) and happily still on 10.8Be interested to hear if any others have had similar issue or can shed light on what i came up against.</blockquote>

[QUOTE="Collin Bl, post: 1618256, member: 95994"] Just to toss another aspect out there as it were. Had been operating very happily on 10.8 for some time and decided that perhaps it was time to move to Mavericks. Did a bootable back up and stopped some 3rd party software loading and did the upgrade. All looked good until i tried to do what i had done daily for entire time on 10.8 viz, stretch a spreadsheet right across the 27 iMac to edge of 20 philips monitor and surprise, surprise, all the portion on the 20 just faded out and i could not see it. After a couple of repeat efforts was left with the choice - try and troubleshoot and perhaps upgrade from iWork 09 ( and have other potential unknown issues crop up ) or revert back to 10.8. In the end i did the 2.5 hours deal of reverting ( including the recovery disk ) and happily still on 10.8 Be interested to hear if any others have had similar issue or can shed light on what i came up against. [/QUOTE]

Verification

Name this item 🌈