Mac mini Late 2014 - Slow SSD speed issue

Joined
Mar 30, 2021
Messages
3
Reaction score
0
Points
1
Hi everyone, I've a Mac mini late 2014. I upgraded it by installing a Samsung SSD.
After some month I noticed a considerable slow-down, in first glance I thought it was something in the pc, later I did a test with Blackmagic Disk Speed Test,and I discovered that the write speed is 74MB/s....with an SSD... I searched on various forums but I did not find a solution.

Before you say that the hardware is not compatible with higher speed, initially the speed was 440-450 MB/s.
The strange thing ism that if I do the test just after a reboot it goes up to that speed...but after some minutes of usage I notice a performance decrease, and if I run another test I discover that the speed has dropped to 70-75 MB/s

(I already tried to initialize the entire Mac to factory status)

Thanks in advance
 
Joined
Oct 16, 2010
Messages
18,166
Reaction score
1,910
Points
113
Location
Brentwood Bay, BC, Canada
Your Mac's Specs
2020 27" i9 5K nano iMac, 1TB(partitioned) SSD, GB, macOS 15.3.1 Sequoia
Hi everyone, I've a Mac mini late 2014. I upgraded it by installing a Samsung SSD.
After some month I noticed a considerable slow-down,


My first question would be:
1, how full is the SSD drive???

2, If within limits, I would be tempted to just have a look at the fragmentation with an app like iDefrag and see what state your files are in. DO NOT DO ANY ACTUAL DEFRAGGING ... just look!!!

3, what other applications or utilities are running, either in the foreground or the background???
This could include Spotlight, file sharing, backup or networking stuff etc.

You did not mention what model Samsung SSD you installed, if that actually matters.


- Patrick
=======
 
Joined
Oct 16, 2010
Messages
18,166
Reaction score
1,910
Points
113
Location
Brentwood Bay, BC, Canada
Your Mac's Specs
2020 27" i9 5K nano iMac, 1TB(partitioned) SSD, GB, macOS 15.3.1 Sequoia
Actually, as I wrote, I just intialized all thing, is empty (the ssd is 1TB)

Samsung QVO I think /QUOTE]


Is the Samsung SSD returnable??? Maybe it's gone Goofy???

Have you tried booting up into Safe Boot Mode and see if things don't improve???

Have a look at the Console or especially Activity Monitor for any runaway apps or utilities or any of their resources.


- Patrick
=======
 
OP
A
Joined
Mar 30, 2021
Messages
3
Reaction score
0
Points
1
I didn't tried the Safe Boot

however the pc now is like brand new.. what process can do this..
 
Joined
Oct 16, 2010
Messages
18,166
Reaction score
1,910
Points
113
Location
Brentwood Bay, BC, Canada
Your Mac's Specs
2020 27" i9 5K nano iMac, 1TB(partitioned) SSD, GB, macOS 15.3.1 Sequoia
I didn't tried the Safe Boot

however the pc now is like brand new.. what process can do this..


I am not sure exactly what you are referring to, but anything made or created in this world can fail.
That is a 100% guarantee for anything man-made!!!

That's why most decent companies have a decent warranty as well as a decent quality control to help protect their reputation.


- Patrick
=======
 

chscag

Well-known member
Staff member
Admin
Joined
Jan 23, 2008
Messages
65,246
Reaction score
1,834
Points
113
Location
Keller, Texas
Your Mac's Specs
2017 27" iMac, 10.5" iPad Pro, iPhone 8, iPhone 11, iPhone 12 Mini, Numerous iPods, Monterey
Before you say that the hardware is not compatible with higher speed, initially the speed was 440-450 MB/s.
The strange thing ism that if I do the test just after a reboot it goes up to that speed...but after some minutes of usage I notice a performance decrease, and if I run another test I discover that the speed has dropped to 70-75 MB/s

Sounds like a worn or defective SATA cable. Try replacing it.

Go to www.ifixit.com and look up the procedure. They also sell the cable as does Mac Sales.

www.macsales.com
 

krs


Joined
Sep 16, 2008
Messages
3,574
Reaction score
618
Points
113
Location
Canada
2, If within limits, I would be tempted to just have a look at the fragmentation with an app like iDefrag and see what state your files are in. DO NOT DO ANY ACTUAL DEFRAGGING ... just look!!!
Just wondering ...
Is fragmentation even a possible issue with an SSD?
Since the storage on an SSD is electronic, nothing mechanical, any fragmentation should only have a minimal effect if any.I swithed from a 500GB 5400rpm spinner to a 1TB Crucial DRAM SSD on my 2012 Mini and even though it is much faster launching apps or opening files, occasionally there is a very noticeable delay - mostly with MS Office applications.
 
Joined
Jan 1, 2009
Messages
16,379
Reaction score
4,735
Points
113
Location
Winchester, VA
Your Mac's Specs
MBP 16" 2023 (M3 Pro), iPhone 16 Pro, plus ATVs, AWatch, MacMinis (multiple)
Just wondering ...
Is fragmentation even a possible issue with an SSD?
Since the storage on an SSD is electronic, nothing mechanical, any fragmentation should only have a minimal effect if any.I swithed from a 500GB 5400rpm spinner to a 1TB Crucial DRAM SSD on my 2012 Mini and even though it is much faster launching apps or opening files, occasionally there is a very noticeable delay - mostly with MS Office applications.
Technically, all files on an SSD are probably fragmented by the wear-leveling function of the internal controller. As a practical issue, it doesn't make any difference in performance.
 
Joined
Feb 1, 2011
Messages
4,904
Reaction score
2,907
Points
113
Location
Sacramento, California
Just wondering ...
Is fragmentation even a possible issue with an SSD?

No, not even a little bit.

An SSD can slow way down if it gets too full. About 80% full and most SSD's are on their last legs. But that isn't the OP's situation.

I think that it's more likely that the slowdown is systemic, rather than being caused by the SSD in particular. Have a look at:

 
Joined
May 18, 2008
Messages
3,668
Reaction score
103
Points
63
Location
Amberley, Canterbury, New Zealand
Your Mac's Specs
MacMini 14.3, 8.1 & 4.1, OS 14.7 10.14, & 10.11 & 10.6; Macbook Pro 8.2, OS 10.12.
This may be considered a broad generalisation, but in a situation like this, ie. "what's happening with my Mac?", I turn to the only fault finding app I ever use - OnyX! https://titanium-software.fr/en/onyx.html. It runs all sorts of tests on an HD or SSD, plus the OS, and reports what needs fixing.
 
Joined
May 21, 2012
Messages
11,309
Reaction score
1,594
Points
113
Location
Southern New England
Your Mac's Specs
2024 M4 14" MBP, iPhone 16 Pro Max, Watch S7 & Watch S9, AirPods Pro 1
This may be considered a broad generalisation, but in a situation like this, ie. "what's happening with my Mac?", I turn to the only fault finding app I ever use - OnyX! https://titanium-software.fr/en/onyx.html. It runs all sorts of tests on an HD or SSD, plus the OS, and reports what needs fixing.
If you want to test your system, you can use EtreCheck,


It only scans your system, it does not change anything. Then you can use what you need.

Edit: For the OP,

Did you try safe boot?
Reset NVRAM?
Reset SMC?
 

Shop Amazon


Shop for your Apple, Mac, iPhone and other computer products on Amazon.
We are a participant in the Amazon Services LLC Associates Program, an affiliate program designed to provide a means for us to earn fees by linking to Amazon and affiliated sites.
Top