Reply to thread

Message: <blockquote data-quote="tongwen" data-source="post: 1581253" data-attributes="member: 325471">1.Turn off your bluetooth(mac)2. When the bluetooth is off, and the power of headset is off, press the "call button" and switch the "on/off" to "on" - as the manual paring instruction. 3. when the call led turns to solid blue, release the call button. (for my own device, it is about 5 seconds, even though the instruction says it is 4 seconds)4. QUICKLY turn your bluetooth(mac) on, and go to set up bluetooth device, then you ll see your LG device in list, QUICKLY select it and click continue.Step 1,2 and 4 is very crutial, if you do manual paring when the bluetooth is on, it won't work. for step 4, if you do not do it quickly , it wont work too,GOOD LUCK!</blockquote>