Reply to thread

Message

<blockquote data-quote="hype.it" data-source="post: 43455" data-attributes="member: 4085">Installing RAM in a PowerBook is about removing some screws (normally 4) and gentling sliding in the SO-DIMM, while trying now to damage it. Afterwards&nbsp; make sure the metal clips at either side are holding the memory in place, preventing it from slipping out again. Your working in a tiny space where phat finger's can barely fit... other then that, it's a piece of cake! FYI:PowerBook 12<img src="http://www.mac-forums.com/forums/attachment.php?attachmentid=522&amp;stc=1" alt="" class="fr-fic fr-dii fr-draggable " style="" />PowerBook 15<img src="http://www.mac-forums.com/forums/attachment.php?attachmentid=520&amp;stc=1" alt="" class="fr-fic fr-dii fr-draggable " style="" />PowerBook 17<img src="http://www.mac-forums.com/forums/attachment.php?attachmentid=521&amp;stc=1" alt="" class="fr-fic fr-dii fr-draggable " style="" />If you never done it before, then take your time... should take a novice no longer then 20 mins, max. If your too scared, ask a trust worthy friend or then take it to a dealer (be prepared, the later might charge you for installation.)[ATTACH=full]520[/ATTACH][ATTACH=full]521[/ATTACH][ATTACH=full]522[/ATTACH]</blockquote>

[QUOTE="hype.it, post: 43455, member: 4085"] Installing RAM in a PowerBook is about removing some screws (normally 4) and gentling sliding in the SO-DIMM, while trying now to damage it. Afterwards make sure the metal clips at either side are holding the memory in place, preventing it from slipping out again. Your working in a tiny space where phat finger's can barely fit... other then that, it's a piece of cake! FYI: [b]PowerBook 12[/b] [img]http://www.mac-forums.com/forums/attachment.php?attachmentid=522&stc=1[/img] [b]PowerBook 15[/b] [img]http://www.mac-forums.com/forums/attachment.php?attachmentid=520&stc=1[/img] [b]PowerBook 17[/b] [img]http://www.mac-forums.com/forums/attachment.php?attachmentid=521&stc=1[/img] If you never done it before, then take your time... should take a novice no longer then 20 mins, max. If your too scared, ask a trust worthy friend or then take it to a dealer (be prepared, the later might charge you for installation.) [ATTACH=full]520[/ATTACH] [ATTACH=full]521[/ATTACH] [ATTACH=full]522[/ATTACH] [/QUOTE]

Verification

Name this item. 🍎