have problem

May 10, 2007
Reaction score
hello. i'm from russia so sorry for my english.
i have a problem.

panic(cpu 1 caller 0x00013AF0): bad dp memory object
Latest stack backtrace for cpu 1:
0x000952D8 0x000957F0 0x00026898 0x00013AF0 0x00076298
0x00076384 0x0028B04C 0x000E603C
0x000E6358 0x000E87B4 0x000E5D60 0x000EC2D0 0x000E6F30
0x0026FED4 0x0027C9A8 0x002AB7F8
0x000ABB30 0x031546C0
Proceeding back via exception chain:
Exception state (sv=0x54651C80)
PC=0x900C7FC0; MSR=0x0000D030; DAR=0x901FCB76;
DSISR=0x40000000; LR=0x0000292C; R1=0xBFFFFE80; XCP=0x00000030 (0xC00
- System call)

Kernel version:
Darwin Kernel Version 8.9.0: Thu Feb 22 20:54:07 PST 2007;
root:xnu-792.17.14~1/RELEASE_PPCModel: PowerMac7,3, BootROM 5.1.8f7,
2 processors, PowerPC G5 (2.2), 1.8 GHz, 2 GB
Graphics: GeForce FX 5200, GeForce FX 5200, AGP, 64 MB
Memory Module: DIMM0/J11, 512 MB, DDR SDRAM, PC3200U-25440
Memory Module: DIMM1/J12, 512 MB, DDR SDRAM, PC3200U-30330
Memory Module: DIMM2/J13, 512 MB, DDR SDRAM, PC3200U-25440
Memory Module: DIMM3/J14, 512 MB, DDR SDRAM, PC3200U-25440
Modem: MicroDash, Euro, V.92, 1.0F, APPLE VERSION 2.6.6
Network Service: Built-in Ethernet, Ethernet, en0
Serial ATA Device: ST380013AS, 74.53 GB
Parallel ATA Device: HL-DT-ST DVD-RW GWA-4082B
USB Device: USB2.0 Hub, Up to 480 Mb/sec, 500 mA
USB Device: Hub in Apple Pro Keyboard, Mitsumi Electric, Up to 12 Mb/
sec, 500 mA
USB Device: Apple Optical USB Mouse, Primax Electronics, Up to 1.5 Mb/
sec, 100 mA
USB Device: Apple Pro Keyboard, Mitsumi Electric, Up to 12 Mb/sec,
250 mA

i instal new ram (all 4 rams new), and install os classic - for the specific programьs (Qurak express 4.1, Adobe Illustrator 8). os classic run in emulation for this prograьms. It can be connected with an arising problem?


Welcome to Mac-Forums, RomanFX.

In the crash log you posted right above, I believe it says one of the RAM modules you installed is bad.

panic(cpu 1 caller 0x00013AF0): bad dp memory object

I don't know how many of them you installed exactly but you will need to eliminate them one by one. Pull one out of the Power Mac, restart, see if it runs ok. If not pull another one out, put the first module you took out back in, restart and see if the system is stable, etc.

Good luck. :)
May 10, 2007
Reaction score
new problem )

Date/Time: 2007-05-13 19:28:38.600 +0400
OS Version: 10.4.9 (Build 8P135)
Report Version: 4

Command: Adobe Photoshop CS2
Path: /Applications/Adobe Photoshop CS2/Adobe Photoshop CS2.app/Contents/MacOS/Adobe Photoshop CS2
Parent: WindowServer [63]

Version: 9.0.2 (9.0.2x312 [20060822.902x312 02:00:00 cutoff]9.0.2x311) (9.0.2)

PID: 223
Thread: 0

Exception: EXC_BAD_ACCESS (0x0001)
Codes: KERN_INVALID_ADDRESS (0x0001) at 0x2ba34be4


Ok. First, I don't know if you pulled out the bad RAM module(s) or not, you haven't updated us on what you did earlier in this thread.

Second, by looking at this Apple webpage in the Developer's Connection website, CrashReporter which explains in detail the various reasons for a crash, it would seem to me that you either don't have enough RAM for Photoshop or it tried to access RAM that wasn't available.

Shop Amazon

Shop for your Apple, Mac, iPhone and other computer products on Amazon.
We are a participant in the Amazon Services LLC Associates Program, an affiliate program designed to provide a means for us to earn fees by linking to Amazon and affiliated sites.