Reply to thread

Message

<blockquote data-quote="msmasters" data-source="post: 349867" data-attributes="member: 28576">Quicksilver&nbsp; 2002, 800&nbsp; MHz, 1 Gig&nbsp; Ram, 80&nbsp; Gig&nbsp; Master(w/OSX10.4) and&nbsp; 250&nbsp; Gig&nbsp; slave(w/OSX&nbsp; 10.4)&nbsp; I bought&nbsp; this&nbsp; Mac about&nbsp; a&nbsp; month&nbsp; ago.&nbsp; It&nbsp; starts&nbsp; up&nbsp; fine.&nbsp; After it warms up&nbsp; the fan goes up&nbsp; to&nbsp; high. If restarted or shut down and started, it will go to a gray screen, with a gray apple, but no pinwheel. After a couple of minutes the gray apple turns to a O with a \ through it. If&nbsp; restarted&nbsp; with&nbsp; the&nbsp; option&nbsp; Key&nbsp; down, it&nbsp; shows&nbsp; both&nbsp; HD's&nbsp; with&nbsp; blessed&nbsp; OSX&nbsp; 10.4&nbsp; on&nbsp; each&nbsp; &nbsp; and&nbsp; if&nbsp; installed, it&nbsp; also&nbsp; shows&nbsp; the&nbsp; emergency&nbsp; DVD. But&nbsp; no&nbsp; matter&nbsp; which&nbsp; disk&nbsp; is&nbsp; selected,&nbsp; it&nbsp; goes&nbsp; to&nbsp; O\. After unpluging to shut it down and waiting a couple of hours(it seems to have to cool down), it starts right up.I've installed a new battery and zapped the pram.I've used Techtools Pro 4.5.2, and&nbsp; Disk&nbsp; Utilities, everything passed. I've used Hardware Monitor 4.11 but this Mac only shows temp sensors for the two internal S.M.A.R.T. hard drives and nothing else.I've installed Tempreture Monitor, but this mac has ATA built in and the app does'nt see the sensors.Can temp( ATA)sensors be replaced or reset? Any way to check cpu temp? How can I check the heatsink? What is heat sink grease and where can I get some?Anything you can think&nbsp; of would be of help, Thanks.</blockquote>

[QUOTE="msmasters, post: 349867, member: 28576"] Quicksilver 2002, 800 MHz, 1 Gig Ram, 80 Gig Master(w/OSX10.4) and 250 Gig slave(w/OSX 10.4) I bought this Mac about a month ago. It starts up fine. After it warms up the fan goes up to high. If restarted or shut down and started, it will go to a gray screen, with a gray apple, but no pinwheel. After a couple of minutes the gray apple turns to a O with a \ through it. If restarted with the option Key down, it shows both HD's with blessed OSX 10.4 on each and if installed, it also shows the emergency DVD. But no matter which disk is selected, it goes to O\. After unpluging to shut it down and waiting a couple of hours(it seems to have to cool down), it starts right up. I've installed a new battery and zapped the pram. I've used Techtools Pro 4.5.2, and Disk Utilities, everything passed. I've used Hardware Monitor 4.11 but this Mac only shows temp sensors for the two internal S.M.A.R.T. hard drives and nothing else. I've installed Tempreture Monitor, but this mac has ATA built in and the app does'nt see the sensors. Can temp( ATA)sensors be replaced or reset? Any way to check cpu temp? How can I check the heatsink? What is heat sink grease and where can I get some? Anything you can think of would be of help, Thanks. [/QUOTE]

Verification

Name this item. 🍎