05-20-2019, 03:04 PM #1
MacBook Air 13'' late 2010 logic board replacement/upgrade....NEED HELP ASAP
- Member Since
- May 20, 2019
so, I have a MacBook Air 13" late 2010 model with a logic board supporting 2GB of RAM. A few weeks ago 1GB of RAM crapped out on me. Needless to say the performance of the computer dropped to just about nothing, it would boot and load and that was about it. Internet usage was almost impossible, every now and then a full page would load. So I decided to spend the money to replace the Logic Board with an upgraded version. 2.13 Ghz and 4GB of RAM. Got the Logic board and installed it everything went smooth. THEN....
I turned on my computer to find a folder flashing with a question mark. Tried to do boot recovery and the whole shebang, nothing worked there is no hard drive being detected and nothing to boot from. I was able to hold down the option/alt key during start up to get the the WIFI bar but nothing above it. It would just hook up to WIFI. I remembered that I had a hard copy of snow leopard laying around somewhere. I grabbed that to install it and boom, the disk shows up along with the WIFI bar again, so I click it and try to install, about 2 minuted in a circle with a slash shows up.
I have no idea what to do from this point? I can't even hold down d to check diagnostics to see if anything is damaged on the board or the hard drive. I DON'T KNOW WHERE TO TURN!!! to be honest im just more frustrated than anything, I need any advice on what to do and or how to fix this issue I would greatly appreciate it.
- 05-20-2019, 03:28 PM #2
- Member Since
- May 20, 2008
- Your Mac's Specs
- 2011 17" MBP 2.2ghz, 16gig ram, OS 10.11.6
Assuming this is a 2010 MacBook Air...the old logic board would have have a removable flash-memory board...and for the new logic board to have any onboard storage...this flash-memory board would have had to been swapped from the old logic board to the new logic board.
If the new logic board just so happened to have included onboard storage already installed...then the flashing question mark is due to no bootable OS installed.
05-25-2019, 10:42 AM #3
One additional comment regarding the Snow Leopard disk the OP tried to use.
AFAIK, the latest SL install disk that Apple sold was 10.6.3
According to EveryMac.com, this MacBook Air was originally shipped with 10.6.4, so there is a good chance the 10.6.3 disk cannot be used to install a new OS.
That would also be confirmed by the circle with the slash the OP reported when trying to use that install disk.
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By Benji1337 in forum Apple NotebooksReplies: 17Last Post: 12-19-2016, 06:28 PM
By DenisTheLegend in forum macOS - Operating SystemReplies: 2Last Post: 10-29-2012, 09:44 AM
By MetalA in forum Apple NotebooksReplies: 8Last Post: 08-20-2010, 02:29 PM
By Eddi3theWolf in forum Apple NotebooksReplies: 7Last Post: 04-21-2010, 02:48 AM
By Actaeon in forum Apple NotebooksReplies: 10Last Post: 06-21-2009, 07:59 PM
Tags for this Thread