Results 1 to 14 of 14
  1. #1
    Airprint can't see printers "through" WAP

    Member Since
    Jul 11, 2015
    Location
    Arlington, Virginia
    Posts
    10
    Your Mac's Specs
    iMac 20" 2.2 GHZ Intel Core Duo [circa 2009] running Yosemite
    Rep Power
    5
    Airprint can't see printers "through" WAP
    Hello,
    I have a Fios Quantum router, and for additional coverage at the back of the house I added a NetGear AC1200 R6120 wireless access point. It connects to the main router via ethernet.

    If I walk up close to the main router, my iPhones and iPads can "see" the two Airprint printers just fine. This is true even though my devices are on a different radio band than the printers (devices are on 5Ghz while the printers only use 2.4 Ghz).

    If I walk farther away, I can't see the Airport printers anymore. I think what is happening is that my devices are roaming to the Netgear WAP. I can't really verify this because the SSID for the 5 Ghz is the same on the router and the WAP. Roaming seems good though ... the goal was to get rid of dead spots and it is working for that purpose

    The WAP and router are still on the same network, though, so why won't the Airprint printers show up when I'm connected to the WAP? Is there some kind of setting on the router or WAP that will allow Airprint to announce itself to the whole network?
    Thanks,
    Mary

  2. #2
    Airprint can't see printers "through" WAP
    lclev's Avatar
    Member Since
    Jul 24, 2013
    Location
    Ohio (USA)
    Posts
    4,275
    Your Mac's Specs
    2020 13" MBPro, 2010 MacPro, 11”‘ iPad Pro, iPhone Xs Max
    Rep Power
    13
    How is your Netgear setup? If the printers are getting their IP addresses from the FIOS router and the Netgear is also handing out IP addresses this could be the issue. The Netgear should be in bridge mode with the FIOS router handing out IP addresses. That way when your device looks at the Netgear for network access the Netgear router sends them to the FIOS router who gives them an IP address and since the printers are also getting their IP addresses from the FIOS your devices should see the printers.

    Lisa
    Recommend using Onyx to clean your Mac.
    If you have been helped, please add to their reputation by clicking on the icon in the lower left hand corner of the post.

  3. #3
    Airprint can't see printers "through" WAP

    Member Since
    Jul 11, 2015
    Location
    Arlington, Virginia
    Posts
    10
    Your Mac's Specs
    iMac 20" 2.2 GHZ Intel Core Duo [circa 2009] running Yosemite
    Rep Power
    5
    Thanks. Your point is exactly correct. When I stand near The router my device has a 192.168.1.x address, and when I roam to the Netgear the address changes to 10.0.0.x.
    Unfortunately the Netgear does not seem to have a setting for bridge mode? There is a checkbox for “VLAN/bridge” but from what I’ve read, I really really don’t want a vlan. Can I be sure it won’t break anything to check this box. Many family members on different platforms depending on me not to break it.

  4. #4
    Airprint can't see printers "through" WAP
    ferrarr's Avatar
    Member Since
    May 21, 2012
    Location
    Pawtucket, RI, U.S.A.
    Posts
    7,846
    Your Mac's Specs
    L2014 Mac mini macOS 15, iPhone 11 iOS 13, 1st Gen 12.9" iPad Pro iPadOS 13
    Rep Power
    16
    I believe it is a limitation with the Verizon Wi-Fi router (but I could be wrong). I have Verizon and went with the Verizon FiOS Extender, which works well.
    Please backup. Everything has a life cycle, unexpected and warning free. Nothing will last as long as you want it to.
    PS: When there is an accident or error, is the tool to blame or is the fool to blame?

  5. #5
    Airprint can't see printers "through" WAP
    chscag's Avatar
    Member Since
    Jan 23, 2008
    Location
    Keller, Texas
    Posts
    60,516
    Your Mac's Specs
    2017 27" iMac, 10.5" iPad Pro, iPhone 7+, iPhone 8, Numerous iPods, Catalina
    Rep Power
    56
    There is a checkbox for “VLAN/bridge” but from what I’ve read, I really really don’t want a vlan.
    Mary:

    Go ahead and check that box. That should put the Netgear into bridge mode. Don't worry about the virtual lan setting. Also, Verizon should be willing to update their FIOS router to the latest. Give them a call and see if they will update you to the latest and maybe even provide an extender with no extra charge.

  6. #6
    Airprint can't see printers "through" WAP
    ferrarr's Avatar
    Member Since
    May 21, 2012
    Location
    Pawtucket, RI, U.S.A.
    Posts
    7,846
    Your Mac's Specs
    L2014 Mac mini macOS 15, iPhone 11 iOS 13, 1st Gen 12.9" iPad Pro iPadOS 13
    Rep Power
    16
    Verizon will send an extender for $10/month or $100.

    You could get another router, and turn off the FiOS Wi-Fi.
    Please backup. Everything has a life cycle, unexpected and warning free. Nothing will last as long as you want it to.
    PS: When there is an accident or error, is the tool to blame or is the fool to blame?

  7. #7
    Airprint can't see printers "through" WAP
    chscag's Avatar
    Member Since
    Jan 23, 2008
    Location
    Keller, Texas
    Posts
    60,516
    Your Mac's Specs
    2017 27" iMac, 10.5" iPad Pro, iPhone 7+, iPhone 8, Numerous iPods, Catalina
    Rep Power
    56
    You could get another router, and turn off the FiOS Wi-Fi.
    Not an option Bob if you also have FIOS TV like I have. Won't work with another router.

  8. #8
    Airprint can't see printers "through" WAP
    ferrarr's Avatar
    Member Since
    May 21, 2012
    Location
    Pawtucket, RI, U.S.A.
    Posts
    7,846
    Your Mac's Specs
    L2014 Mac mini macOS 15, iPhone 11 iOS 13, 1st Gen 12.9" iPad Pro iPadOS 13
    Rep Power
    16
    Quote Originally Posted by chscag View Post
    Not an option Bob if you also have FIOS TV like I have. Won't work with another router.
    Really? I didn't know that. I thought because they are all connected through fiber optic cable, that was how everything worked?
    Please backup. Everything has a life cycle, unexpected and warning free. Nothing will last as long as you want it to.
    PS: When there is an accident or error, is the tool to blame or is the fool to blame?

  9. #9
    Airprint can't see printers "through" WAP
    pm-r's Avatar
    Member Since
    Oct 16, 2010
    Location
    Brentwood Bay, BC, Canada
    Posts
    13,284
    Rep Power
    20
    Would either of these possibly help...???:

    Unable to connect wireless printer SOLVED [FIOS router]
    Solved: Unable to connect wireless printer - Verizon Fios Community

    Recommended settings for Wi-Fi routers and access points
    Recommended settings for Wi-Fi routers and access points – Apple Support





    - Patrick
    ======

  10. #10
    Airprint can't see printers "through" WAP
    chscag's Avatar
    Member Since
    Jan 23, 2008
    Location
    Keller, Texas
    Posts
    60,516
    Your Mac's Specs
    2017 27" iMac, 10.5" iPad Pro, iPhone 7+, iPhone 8, Numerous iPods, Catalina
    Rep Power
    56
    Really? I didn't know that. I thought because they are all connected through fiber optic cable, that was how everything worked?
    Yeah, you would think so. The FIOS routers supplied by Verizon and Frontier (same routers) also send a WiFi signal to the special TV set top box. Without that signal, no TV. The Verizon routers are an all in one enclosed modem and router. If you do not use FIOS TV, then you can bridge another router.

  11. #11
    Airprint can't see printers "through" WAP
    lclev's Avatar
    Member Since
    Jul 24, 2013
    Location
    Ohio (USA)
    Posts
    4,275
    Your Mac's Specs
    2020 13" MBPro, 2010 MacPro, 11”‘ iPad Pro, iPhone Xs Max
    Rep Power
    13
    Sorry it took me so long to get back to you. Just finished a big project.

    Your Netgear is NOT setup to act as a Wireless Access Point (WAP). A wireless access point only provides a point of access to a main router. Your Netgear is a router because it is merrily handing out IP addresses to devices then sending devices to the FIOS router to find the internet. You need to MAKE it be a WAP.

    This is a link to the manual for your Netgear router. It should start on page 113. You need to scroll down to the section on Using the Router as a wireless access point only. Follow the directions and it hopefully will work perfectly!

    Use The Router As A Wifi Access Point Only - NETGEAR R6120 User Manual [Page 113] | ManualsLib

    If you have any problems or questions post back.

    Lisa
    Recommend using Onyx to clean your Mac.
    If you have been helped, please add to their reputation by clicking on the icon in the lower left hand corner of the post.

  12. #12
    Airprint can't see printers "through" WAP
    pm-r's Avatar
    Member Since
    Oct 16, 2010
    Location
    Brentwood Bay, BC, Canada
    Posts
    13,284
    Rep Power
    20
    This is a link to the manual for your Netgear router. It should start on page 113. You need to scroll down to the section on Using the Router as a wireless access point only. Follow the directions and it hopefully will work perfectly!

    Wow... It looks like some routers have certainly advanced over the years, and especially considering that manual carries on for a total of 140 pages!!!

    It doesn't seem that long ago when one was lucky if you even got a single sheet folded over as the complete connection manual.

    Just saying... some things seem to be a little bit more involved these days when it comes to connecting things in the computer wireless world.





    - Patrick
    ======

  13. #13
    Airprint can't see printers "through" WAP

    Member Since
    Jul 11, 2015
    Location
    Arlington, Virginia
    Posts
    10
    Your Mac's Specs
    iMac 20" 2.2 GHZ Intel Core Duo [circa 2009] running Yosemite
    Rep Power
    5
    Cool
    Hi everyone. Thanks for your suggestions! I did some research on my particular Netgear, and although it does not offer a bridge mode, the suggestion for "AP mode" was exactly right. I'm not sure why the setup wizard didn't offer this mode, as it's what I wanted all along, but whatever.

    All devices are now getting 192.168.1.x addresses and they can see the AirPort printers from anywhere in the house.

    Thanks!

  14. #14
    Airprint can't see printers "through" WAP
    lclev's Avatar
    Member Since
    Jul 24, 2013
    Location
    Ohio (USA)
    Posts
    4,275
    Your Mac's Specs
    2020 13" MBPro, 2010 MacPro, 11”‘ iPad Pro, iPhone Xs Max
    Rep Power
    13
    I have found setup wizards rarely get it right. I always do a manual setup but I realize it can be a bit complicated. Glad you got it working!

    Lisa
    Recommend using Onyx to clean your Mac.
    If you have been helped, please add to their reputation by clicking on the icon in the lower left hand corner of the post.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Printer not appearing in "Printers & scanners"
    By digital in forum Other Hardware and Peripherals
    Replies: 3
    Last Post: 05-28-2015, 05:27 AM
  2. macbook Air printers "offline"
    By divetrucker in forum Internet, Networking, and Wireless
    Replies: 1
    Last Post: 08-13-2011, 05:02 PM
  3. HP adds AirPrint support to more printers
    By OneMoreThing... in forum Apple Rumors and Reports
    Replies: 0
    Last Post: 06-23-2011, 09:51 AM
  4. Airport utility reads "USB printers: none" when everything use to work fine.
    By bdevereux in forum Internet, Networking, and Wireless
    Replies: 4
    Last Post: 05-07-2009, 06:41 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •