Hello All,
I am trying to help a friend of mine setup wireless printing from her Macbook. Unfortunately I don’t know very much about Macs and OSX but I am a quick learner
The setup:
Virgin Media Cable Modem -> connected (RJ45) to a Wireless Linksys Cable Modem -> connected (RJ45) to a Belkin USB Hub.
From the USB hub I have two printers connected:
1 x HP Deskjet
1 x Samsung ML-2240 Laserjet
Both these printers install to the Macbook perfectly as default USB devices (wirelessly) via the USB Hub. They also appear correctly in the Belkin USB Hub software console.
The HP printer works perfectly every time it is used, no issues whatsoever. The Samsung printer prints ok the first time but the print jobs do not disappear from the print queue on the Macbook, the print job doesn’t appear to complete even though it has actually printed without any issue.
The problem this causes is that after the first print job has been printed it is not possible to print again. Even if I delete the print job from the queue manually I cannot still not print a second time. The only way I can get the printer to print again is to unplug and then plug back in the USB cable that is connected to the USB Hub. When I unplug the cable the print job disappears from the queue on the Macbook. I can then reconnect the USB cable and connect to the printer and it will print again.
I have made sure that I have the latest firmware on the Macbook which is running 10.5.* OSX. I have also installed the latest Firmware and Drivers on the Samsung Printer and the USB Hub.
Is there a different way to setup the print queue that you think may help? Any ideas would be greatly appreciated. I spent 5 hours on this yesterday and it still isn’t working
Thanks
M
I am trying to help a friend of mine setup wireless printing from her Macbook. Unfortunately I don’t know very much about Macs and OSX but I am a quick learner
The setup:
Virgin Media Cable Modem -> connected (RJ45) to a Wireless Linksys Cable Modem -> connected (RJ45) to a Belkin USB Hub.
From the USB hub I have two printers connected:
1 x HP Deskjet
1 x Samsung ML-2240 Laserjet
Both these printers install to the Macbook perfectly as default USB devices (wirelessly) via the USB Hub. They also appear correctly in the Belkin USB Hub software console.
The HP printer works perfectly every time it is used, no issues whatsoever. The Samsung printer prints ok the first time but the print jobs do not disappear from the print queue on the Macbook, the print job doesn’t appear to complete even though it has actually printed without any issue.
The problem this causes is that after the first print job has been printed it is not possible to print again. Even if I delete the print job from the queue manually I cannot still not print a second time. The only way I can get the printer to print again is to unplug and then plug back in the USB cable that is connected to the USB Hub. When I unplug the cable the print job disappears from the queue on the Macbook. I can then reconnect the USB cable and connect to the printer and it will print again.
I have made sure that I have the latest firmware on the Macbook which is running 10.5.* OSX. I have also installed the latest Firmware and Drivers on the Samsung Printer and the USB Hub.
Is there a different way to setup the print queue that you think may help? Any ideas would be greatly appreciated. I spent 5 hours on this yesterday and it still isn’t working
Thanks
M