Logic Board repair

Joined
Nov 26, 2016
Messages
4
Reaction score
0
Points
1
I own a Apple MacBook Pro "Core i7" 2.2 15" Late 2011 that has had the logic board damaged near to the left of the ram slot.

In the picture I attached I have circled where I believe the damage is. I'm not sure if this is a resistor or what.

though it seems to be missing on my logic board after someone replaced the ram and now the HDD is not being read.

Any help would be appreciated !!!!No code has to be inserted here.

Capture101.PNG
 

pigoo3

Well-known member
Staff member
Admin
Joined
May 20, 2008
Messages
44,213
Reaction score
1,424
Points
113
Location
U.S.
Your Mac's Specs
2017 15" MBP, 16gig ram, 1TB SSD, OS 10.15
What sort of help are you looking for? Are you looking for logic board repair help? If so...I'm afraid only seriously skilled folks usually do this. And by "serious"...I mean depot repair employees with access to seriously expensive equipment (and this is if the logic board repair makes financial sense).

You may want to look into Apple flat rate repair service for this. The cost may still be worth it on a 2011 15" MBP.:)

- Nick
 
OP
A
Joined
Nov 26, 2016
Messages
4
Reaction score
0
Points
1
What sort of help are you looking for? Are you looking for logic board repair help? If so...I'm afraid only seriously skilled folks usually do this. And by "serious"...I mean depot repair employees with access to seriously expensive equipment (and this is if the logic board repair makes financial sense).

You may want to look into Apple flat rate repair service for this. The cost may still be worth it on a 2011 15" MBP.:)

- Nick

Nick,

I want to replace this part that is located in the picture attached in original post. I have someone capable of doing the repair, but I figured I would find out on my own first what i'm dealing with. To my belief it is a resistor so i would need to know the specs.

Regards,
Adam
 

chscag

Well-known member
Staff member
Admin
Joined
Jan 23, 2008
Messages
65,248
Reaction score
1,833
Points
113
Location
Keller, Texas
Your Mac's Specs
2017 27" iMac, 10.5" iPad Pro, iPhone 8, iPhone 11, iPhone 12 Mini, Numerous iPods, Monterey
Are you sure a part is missing? Without a schematic or service manual, you're going to be hard pressed to find out if anything is missing or if that's the original design layout. I find it hard to believe someone could have removed anything from the logic board just from replacing memory modules or the hard drive. You may be able to get a view of the logic board by going to the ifixit web site and look up the take apart procedures for your particular MacBook Pro. www.ifixit.com

And if you're thinking about digging up an Apple schematic or service manual; good luck. Apple keeps that stuff locked up like gold at Fort Knox.
 
OP
A
Joined
Nov 26, 2016
Messages
4
Reaction score
0
Points
1
Are you sure a part is missing? Without a schematic or service manual, you're going to be hard pressed to find out if anything is missing or if that's the original design layout. I find it hard to believe someone could have removed anything from the logic board just from replacing memory modules or the hard drive. You may be able to get a view of the logic board by going to the ifixit web site and look up the take apart procedures for your particular MacBook Pro. www.ifixit.com

And if you're thinking about digging up an Apple schematic or service manual; good luck. Apple keeps that stuff locked up like gold at Fort Knox.



I'm 99% sure its missing or damaged. I found high res pictures and compared to mine with magnifying glass and its very clear that it was damaged and removed. I tried find schematics, but like you said difficult had no luck.
 
OP
A
Joined
Nov 26, 2016
Messages
4
Reaction score
0
Points
1
Just a head up I believe I found my answer on another forum site. I was told it's reference designator FL4501 which is a 12 Ohm 100mA-8.5GhZ common mode filter. This particular one is a TDK made TCM0806-4SM.
 

chscag

Well-known member
Staff member
Admin
Joined
Jan 23, 2008
Messages
65,248
Reaction score
1,833
Points
113
Location
Keller, Texas
Your Mac's Specs
2017 27" iMac, 10.5" iPad Pro, iPhone 8, iPhone 11, iPhone 12 Mini, Numerous iPods, Monterey
Good news. But it makes me wonder why someone would remove that particular component unless it was damaged by a short? And by the way, that's not a normal resistor but actually a high frequency filter.
 

dtravis7


Retired Staff
Joined
Jan 4, 2005
Messages
30,133
Reaction score
703
Points
113
Location
Modesto, Ca.
Your Mac's Specs
MacMini M-1 MacOS Monterey, iMac 2010 27"Quad I7 , MBPLate2011, iPad Pro10.5", iPhoneSE
Looking at where the filter is missing (close to the Ram Clips) maybe someone got rough taking out the RAM and broke the part off the board. I have seen it all including a person brushing the Logic board HARD with a toothbrush and Alcohol and tearing off many surface mounted parts!!!
 

pigoo3

Well-known member
Staff member
Admin
Joined
May 20, 2008
Messages
44,213
Reaction score
1,424
Points
113
Location
U.S.
Your Mac's Specs
2017 15" MBP, 16gig ram, 1TB SSD, OS 10.15
Just a head up I believe I found my answer on another forum site. I was told it's reference designator FL4501 which is a 12 Ohm 100mA-8.5GhZ common mode filter. This particular one is a TDK made TCM0806-4SM.

If this is true. Please give us an update how things went (good or bad).:)

- Nick
 

Shop Amazon


Shop for your Apple, Mac, iPhone and other computer products on Amazon.
We are a participant in the Amazon Services LLC Associates Program, an affiliate program designed to provide a means for us to earn fees by linking to Amazon and affiliated sites.
Top