Forums
New posts
Articles
Product Reviews
Policies
FAQ
Log in
Register
What's new
Search
Search
Search titles only
By:
New posts
Menu
Log in
Register
Install the app
Install
Forums
Apple Computing Products:
macOS - Operating System
removed hard drive from external case and my mac won't recognize it installed inside!
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="unsafeatspeed" data-source="post: 757036" data-attributes="member: 74129"><p>First OFF with SCSI drives there is no Master or Slave as with IDE drives. But you do need to set the ID number for the SCSI chain. You said that you pulled the drive from an external case. Seagate offers two basic configuration one model end in LC the other LW the difference is the LC model is designed to mount in an external case. </p><p>Go to Seagate under support locate your drive model you may have to register to get the jumper information. Once you find your drive look at the jumper setting for setting the SCSI ID #. The internal boot drive is set to 0 and the host adapter is set to 7 so pick 2 thur 6. If you have only one jumper pin then pick an ID that only needs a single jumper. That should do it. Install and start ur up.</p></blockquote><p></p>
[QUOTE="unsafeatspeed, post: 757036, member: 74129"] First OFF with SCSI drives there is no Master or Slave as with IDE drives. But you do need to set the ID number for the SCSI chain. You said that you pulled the drive from an external case. Seagate offers two basic configuration one model end in LC the other LW the difference is the LC model is designed to mount in an external case. Go to Seagate under support locate your drive model you may have to register to get the jumper information. Once you find your drive look at the jumper setting for setting the SCSI ID #. The internal boot drive is set to 0 and the host adapter is set to 7 so pick 2 thur 6. If you have only one jumper pin then pick an ID that only needs a single jumper. That should do it. Install and start ur up. [/QUOTE]
Verification
Post reply
Forums
Apple Computing Products:
macOS - Operating System
removed hard drive from external case and my mac won't recognize it installed inside!
Top