- Joined
- Sep 24, 2007
- Messages
- 274
- Reaction score
- 4
- Points
- 18
- Location
- New England
- Your Mac's Specs
- 27" iMac Retina 5K/3.4GHz Core i5/256GB SSD/40GB DDR4/Logitech MX Master 2S/
My setup has a LinkSys Wireless G Cable Gateway Router, and my wired LinkSys Print Server is a EPSX3 v.1.0 which worked like a charm in windows, but now... I can access the print server via LinkSys utilities, but actually getting the mac to install the driver(s) correctly and then print properly is just not happening. I can print a sort of information/diagnostics page with all the hardware/printer/network info... but if I try to print a document, the printer beeps like it will print, and then just blinks (led). Pressing te print button doesn't do anything at that point either. I have two printers installed, a HP 1220c wide body deskjet, and a HP LaserJet 5P. Neither have USB connections (both parallel cables).
Any/all help and info is appreciated.
Any/all help and info is appreciated.