Hi, i have a G4 MDD powermac with full-ish 80gb hard drive and have installed a segate 160gb which i was told was ok.
the problem is that it is there but not on the desktop. I followed the instructions in my manual and thought that would be all i had to do!
the original hard drive from system profiler;
Capacity: 74.53 GB
Model: ST380011A
Revision: 3.06
Serial Number: 3JV5W82C
Removable Media: No
Detachable Drive: No
BSD Name: disk1
Protocol: ATA
Unit Number: 0
Socket Type: Internal
OS9 Drivers: Yes
S.M.A.R.T. status: Verified
Volumes:
Ed's:
Capacity: 74.53 GB
Available: 1.85 GB
Writable: Yes
File System: Journaled HFS+
BSD Name: disk1s9
Mount Point: /
additional hard drive form system profiler;
Capacity: 149.05 GB
Model: ST3160815A
Revision: 3.AAC
Serial Number: 6RA0JY43
Removable Media: No
Detachable Drive: No
BSD Name: disk0
Protocol: ATA
Unit Number: 1
Socket Type: Internal
OS9 Drivers: No
S.M.A.R.T. status: Not Supported
there are differences but i am a technophobe and know nothing !!!!
please help
thanks in advance
the problem is that it is there but not on the desktop. I followed the instructions in my manual and thought that would be all i had to do!
the original hard drive from system profiler;
Capacity: 74.53 GB
Model: ST380011A
Revision: 3.06
Serial Number: 3JV5W82C
Removable Media: No
Detachable Drive: No
BSD Name: disk1
Protocol: ATA
Unit Number: 0
Socket Type: Internal
OS9 Drivers: Yes
S.M.A.R.T. status: Verified
Volumes:
Ed's:
Capacity: 74.53 GB
Available: 1.85 GB
Writable: Yes
File System: Journaled HFS+
BSD Name: disk1s9
Mount Point: /
additional hard drive form system profiler;
Capacity: 149.05 GB
Model: ST3160815A
Revision: 3.AAC
Serial Number: 6RA0JY43
Removable Media: No
Detachable Drive: No
BSD Name: disk0
Protocol: ATA
Unit Number: 1
Socket Type: Internal
OS9 Drivers: No
S.M.A.R.T. status: Not Supported
there are differences but i am a technophobe and know nothing !!!!
please help
thanks in advance