- Joined
- Dec 28, 2006
- Messages
- 41
- Reaction score
- 0
- Points
- 6
- Location
- Lakewood California
- Your Mac's Specs
- 17-inch model 2.0GHz Intel Core 2 Duo processor
Hi
I recently updated my airport extreme with the new firmware and it ran me through all the setup. when all was said and done i can not log onto the internet now. Everything was working fine until the firmware upgrade. here is the message i keep getting, I also did a hard reset on the router.
MESSAGE
Poblem 1 of 1 : Internet Connection
Your base station does not have a valid IP address. Make sure your base station is connected to your broadband modem or local network,verify your settings, and try again. If you still cant connect, ccontact your internet service provider.
NOTE
I can by pass the router and plug my cable modem directly into computer and get connection. So the problem lies somewhere in configuring the router after the darn firmware upgrade. ANY HELP WOULD BE WONDERFUL
THANKS!!!!!!!!
I recently updated my airport extreme with the new firmware and it ran me through all the setup. when all was said and done i can not log onto the internet now. Everything was working fine until the firmware upgrade. here is the message i keep getting, I also did a hard reset on the router.
MESSAGE
Poblem 1 of 1 : Internet Connection
Your base station does not have a valid IP address. Make sure your base station is connected to your broadband modem or local network,verify your settings, and try again. If you still cant connect, ccontact your internet service provider.
NOTE
I can by pass the router and plug my cable modem directly into computer and get connection. So the problem lies somewhere in configuring the router after the darn firmware upgrade. ANY HELP WOULD BE WONDERFUL
THANKS!!!!!!!!