First I would like to say that I am a noob when it comes to MAC computers.
iMAC G3 / 450 mhz slot loading CD
This computer was given to me to reinstall OS
This computer may have been a part of a school district network and labeled obsolete
no boot chime when powered on
grey screen
MAC picasso mac 9.1 logo
"welcome to MAC OS"
Name & Password
buttons : shutdown/change password/login
I do not have the login info needed to get into OS 9.1
* QUestion: At this point, if I insert a CD into the CD slot, should the CD-rom "receive" the CD and pull it in?
This machine does not pull the CD in. But it does push out a CD that I pushed in there and proceeds to eject it the next time I boot up the computer.
on boot hold down command + option + p + r to reset pram
I let the chime go about 4 times
The chime is audible during this step of resetting pram
hold down "C" does not get into the option to boot into CD
hold down "t" gives me the floating firewire logo.
unfortunately I do not have an external CD for use with this mode
hold down "n" gives the globe icon.
unfortunately I do not have a netboot server to make use of this mode.
hold down option gives the available options
- refresh (circle arrow)
- HD
- arrow pointing right
The CD-rom is not an option
Control + Z gets into open firmware
rest-nvram
reset-all
ctrl+option+p+r to reset pram
then hold down "c" on the next reboot does not get the option to boot from CD and I get the mac os name and password prompt.
At this point, I am not sure what I can do to reinstall OS.
Again, I will openly admit to being clueless when it comes to MACs.
iMAC G3 / 450 mhz slot loading CD
This computer was given to me to reinstall OS
This computer may have been a part of a school district network and labeled obsolete
no boot chime when powered on
grey screen
MAC picasso mac 9.1 logo
"welcome to MAC OS"
Name & Password
buttons : shutdown/change password/login
I do not have the login info needed to get into OS 9.1
* QUestion: At this point, if I insert a CD into the CD slot, should the CD-rom "receive" the CD and pull it in?
This machine does not pull the CD in. But it does push out a CD that I pushed in there and proceeds to eject it the next time I boot up the computer.
on boot hold down command + option + p + r to reset pram
I let the chime go about 4 times
The chime is audible during this step of resetting pram
hold down "C" does not get into the option to boot into CD
hold down "t" gives me the floating firewire logo.
unfortunately I do not have an external CD for use with this mode
hold down "n" gives the globe icon.
unfortunately I do not have a netboot server to make use of this mode.
hold down option gives the available options
- refresh (circle arrow)
- HD
- arrow pointing right
The CD-rom is not an option
Control + Z gets into open firmware
rest-nvram
reset-all
ctrl+option+p+r to reset pram
then hold down "c" on the next reboot does not get the option to boot from CD and I get the mac os name and password prompt.
At this point, I am not sure what I can do to reinstall OS.
Again, I will openly admit to being clueless when it comes to MACs.