- Joined
- Nov 18, 2017
- Messages
- 3
- Reaction score
- 0
- Points
- 1
hi there, my wifi started to deteriorate and would only work within a few metres of a router, i was going to change the wifi card but found the 3 antenna wires were broken. i read a few post and have seen this has happened to a others, i have searched online for help and found many comments about replacing this parts, but none quite answer my questions, which are.....
1, what do the 3 wires do? if i was able to re-solder them, would they have to be connected to a specific wire/order or are they 3 of the same thing.
2, if the above wasn't possible and i was going to install the new part, can i remove the camera wire from this and use my existing one, this as far as i'm aware would save me having to remove the glass
thanks
1, what do the 3 wires do? if i was able to re-solder them, would they have to be connected to a specific wire/order or are they 3 of the same thing.
2, if the above wasn't possible and i was going to install the new part, can i remove the camera wire from this and use my existing one, this as far as i'm aware would save me having to remove the glass
thanks
Last edited: