- Joined
- May 9, 2013
- Messages
- 9
- Reaction score
- 0
- Points
- 1
My track pad was acting up, so I did what I normally do; I shut it down and then used an electronics spray cleaner made by 3M to clean it and the reset of the machine. The battery was at about 35% and the health is at 96%. When I tried turning it on, it did not start up. I pushed the battery level button on the side and the lights did not illuminate. I connected the MagSafe adapter and the light did not illuminate. I removed the back cover and checked the RAM and it was unseated so I thought that was the problem so I removed both cards and seated them properly. Nothing. I checked the grounding plates at the back of the machine. Nothing. I removed the battery, disconnected the connector and then reconnected it. Nothing. No other connectors looked unseated. Any ideas?