Hi guys,
I have a home with tick walls and creating a decent wireless network was always a challenge. Recently I’ve decided to go for Apple products since I had a 4th gen airport express that worked well for airplay.
I bought a new time capsule, airport extreme, and one airport express. So in total I have 4 apple devices that I can use for creating a good wireless network. But what I found out is that having a full signal doesn’t mean that you will have good speeds, and speeds are really slow like 3Mb/s max on some places on the house.
The way that everything is configured at the moment is that I’ve configured the time capsule to be the main router and with the other three I’ve spreaded them over my house and selected the option to extend a wireless network using Airport Utility 6.2 on OSX.
What is strange that I have a full signal on almost all corners but very bad speeds. I did some research and found a tool that would show what the less crowded channel that you can choose for you wireless network (Meraki WiFi Stumbler)
In all my experience of extending a wireless network I’ve always used routers with DD-WRT so I could select the router to be a repeater bridge (and have two distinct networks, with different names) or link the routers with WDS linking them using the MAC address. In both cases all the documentation I’ve read recommended to set all routers of the same network with the same channel.
When I used the stumbler tool to see what channel my network was, since it was set as automatic because it’s the recommendation of Apple documentation, I found out that all 4 routers were operating on different channel on both 2.4Ghz frequencies and 5Ghz frequencies.
What is strange with the wireless network is that sometimes when it is really slow the speed of the internet, if I disconnect from the wireless network and connect again it gets a better connection, like I was connection to a closer router. But after sometime speeds get crappy again, like it changed to the far router again.
My question is, what is the best way to link all this routers together wirelessly? Is there a way to make them to be all on the same channel? Is that important?
On the Airport Utility 6.2 I don’t see any field that would make possible to link this routers using WDS. On the internet I found some documentation for configuring the routers with WDS with the Airport Utility 5.6.
All my routers are updated to the latest version (7.6.3). Please let me know how to proceed to have a decent network on my house. I wouldn’t mind having the network set with different SSIDs but it would be better to use the same network name on all the house.
Thanks in advance,
S
I have a home with tick walls and creating a decent wireless network was always a challenge. Recently I’ve decided to go for Apple products since I had a 4th gen airport express that worked well for airplay.
I bought a new time capsule, airport extreme, and one airport express. So in total I have 4 apple devices that I can use for creating a good wireless network. But what I found out is that having a full signal doesn’t mean that you will have good speeds, and speeds are really slow like 3Mb/s max on some places on the house.
The way that everything is configured at the moment is that I’ve configured the time capsule to be the main router and with the other three I’ve spreaded them over my house and selected the option to extend a wireless network using Airport Utility 6.2 on OSX.
What is strange that I have a full signal on almost all corners but very bad speeds. I did some research and found a tool that would show what the less crowded channel that you can choose for you wireless network (Meraki WiFi Stumbler)
In all my experience of extending a wireless network I’ve always used routers with DD-WRT so I could select the router to be a repeater bridge (and have two distinct networks, with different names) or link the routers with WDS linking them using the MAC address. In both cases all the documentation I’ve read recommended to set all routers of the same network with the same channel.
When I used the stumbler tool to see what channel my network was, since it was set as automatic because it’s the recommendation of Apple documentation, I found out that all 4 routers were operating on different channel on both 2.4Ghz frequencies and 5Ghz frequencies.
What is strange with the wireless network is that sometimes when it is really slow the speed of the internet, if I disconnect from the wireless network and connect again it gets a better connection, like I was connection to a closer router. But after sometime speeds get crappy again, like it changed to the far router again.
My question is, what is the best way to link all this routers together wirelessly? Is there a way to make them to be all on the same channel? Is that important?
On the Airport Utility 6.2 I don’t see any field that would make possible to link this routers using WDS. On the internet I found some documentation for configuring the routers with WDS with the Airport Utility 5.6.
All my routers are updated to the latest version (7.6.3). Please let me know how to proceed to have a decent network on my house. I wouldn’t mind having the network set with different SSIDs but it would be better to use the same network name on all the house.
Thanks in advance,
S