- Joined
- Apr 11, 2007
- Messages
- 85
- Reaction score
- 0
- Points
- 6
- Location
- UK
- Your Mac's Specs
- iMac 20
I have just replaced my old Airport Express (b/g variant) with an Airport Extreme (b/g/n variant) and I have various problems.
We had a series of issues with the old Express router that caused us to change....mainly related to Wifi drops (router needed a reset every 24 hours) but also because I was trying to hook up a Thinkflood Redeye to the home AV set up and there was no way to reliably connect them.
The setup looks like this:
DSL-------Cisco ISR-------Airport------HOME LAN
All of the home network connects either wired or wirelessly via the Aiport
We are running double NAT but that caused no issue to the Express so I cannot see why it would hurt the Extreme ?
I cannot get the Extreme to answer to PINGS.
The Express responds.
The Cisco ISR answers PINGS in both cases
I have forced the Wireless off the Airport to N mode only / I have tried forcing the channel to 13
Connections are unreliable and I see occasional web site misses and hangs
We also have a BROTHER MFC-7820N printer which supports BONJOUR that I can no longer add as a device beyond the new Airport
Ideas ?
We had a series of issues with the old Express router that caused us to change....mainly related to Wifi drops (router needed a reset every 24 hours) but also because I was trying to hook up a Thinkflood Redeye to the home AV set up and there was no way to reliably connect them.
The setup looks like this:
DSL-------Cisco ISR-------Airport------HOME LAN
All of the home network connects either wired or wirelessly via the Aiport
We are running double NAT but that caused no issue to the Express so I cannot see why it would hurt the Extreme ?
I cannot get the Extreme to answer to PINGS.
The Express responds.
The Cisco ISR answers PINGS in both cases
I have forced the Wireless off the Airport to N mode only / I have tried forcing the channel to 13
Connections are unreliable and I see occasional web site misses and hangs
We also have a BROTHER MFC-7820N printer which supports BONJOUR that I can no longer add as a device beyond the new Airport
Ideas ?