On the bottom part of the A1181 case, just behind the battery connector, there is a bracket that seems glued to the plastic, and the bracket holds the two screws on that side of the machine. One of the threaded posts on the unit I'm working on has broken off. Is there a source for a new piece like this so I can thread the screw back into the machine?
I've attached an image. You can see on the left hand side no threaded portion, on the right hand side of the bracket there is a threaded portion.
I've attached an image. You can see on the left hand side no threaded portion, on the right hand side of the bracket there is a threaded portion.