This is kicking my tail, cant figure this out. Reaching out to this forum for help...
I have an A1181 unit w/ 2.4ghz Core 2 Duo:
The unit will not run unless its with the A/C adapter/magsafe connected. The battery I am using is new and original, and I have an extra OEM battery that shows identical symptoms. I have another Macbook both batteries work fine.
Here is what I've already tried: I have changed the battery connector. I have also cleaned with contact cleaner the female part of the logic board where it plugs in.
The Macbook works fine. Charges the battery, shows orange while charging and green when full on the magsafe adapter.
Mac also recognizes battery and shows time left, but as soon as you disconnect the A/C adapter/magsafe the Mac shuts off!
Any ideas other than replacing the logic board? I have a 1.83 Ghz logic board standing by, I just am going to miss the 2.4Ghz = /
Thanks in advance for your help and for the website!!
I have an A1181 unit w/ 2.4ghz Core 2 Duo:
The unit will not run unless its with the A/C adapter/magsafe connected. The battery I am using is new and original, and I have an extra OEM battery that shows identical symptoms. I have another Macbook both batteries work fine.
Here is what I've already tried: I have changed the battery connector. I have also cleaned with contact cleaner the female part of the logic board where it plugs in.
The Macbook works fine. Charges the battery, shows orange while charging and green when full on the magsafe adapter.
Mac also recognizes battery and shows time left, but as soon as you disconnect the A/C adapter/magsafe the Mac shuts off!
Any ideas other than replacing the logic board? I have a 1.83 Ghz logic board standing by, I just am going to miss the 2.4Ghz = /
Thanks in advance for your help and for the website!!