However I have used the recommended nVidia GT-120 Video Card with 1 Standard DVI and 1Display Port. I plug the Monitor into the DVI incidently it is a Dell Monitor not a Mac monitor, which shouldnt matter. When I power on the unit the white power light comes on solid and I get the infamous 'Chime' of goodness. But no Video is displayed on the monitor. What is going on here. Was I mis advised on the Video Card? Am I not doing something correctly? what is it.
Here is the configuration of hardware:
8 Core Xeon 2.66 (so I Was Told)
2 x 1GB Fully Buffered memory in memory riser A and Memory Slots 1 & 2
nVidia GT-120 PCI-Express card in PCI-e slot #1
DVD-DL Drive set as Cable Select and plugged into the end of the IDE Cable
Western Digital SATA Hard Drive Mounted to the Drive Sled and inserted into the Drive Position closest to the front of the Case where the drive doors are.
To any that can help I will be greatly appreciated.
Thank you all that read this sooo much
Regards
Dev
Here is the configuration of hardware:
8 Core Xeon 2.66 (so I Was Told)
2 x 1GB Fully Buffered memory in memory riser A and Memory Slots 1 & 2
nVidia GT-120 PCI-Express card in PCI-e slot #1
DVD-DL Drive set as Cable Select and plugged into the end of the IDE Cable
Western Digital SATA Hard Drive Mounted to the Drive Sled and inserted into the Drive Position closest to the front of the Case where the drive doors are.
To any that can help I will be greatly appreciated.
Thank you all that read this sooo much
Regards
Dev