- Joined
- Oct 6, 2010
- Messages
- 47
- Reaction score
- 0
- Points
- 6
- Your Mac's Specs
- iMac 24" 2.66 GHz C2D 4GB RAM Nvidia GeForce 9400 | iPhone 3GS | TV2
Firstly, could I just say I'm not sure whether I've posted this in the right section-not sure if it should go in Darwin and development or something, so sorry if I've put it in the wrong place.
I'm new to compiling the software from source files. So I was wondering if someone can point out the (probably) glaringly obvious here which I can't see. This is basically what I've typed into Terminal and what I see now.
Last login: Tue Apr 5 19:11:20 on ttys001
james-pc:~ James$ sudo port install hydra
Password:
---> Computing dependencies for hydra
---> Dependencies to be installed: libssh01 openssl zlib
---> Fetching zlib
---> Attempting to fetch zlib-1.2.5.tar.bz2 from zlib Home Site
---> Attempting to fetch zlib-1.2.5.tar.bz2 from Index of /zlib
---> Attempting to fetch zlib-1.2.5.tar.bz2 from Index of http://mirror.aarnet.edu.au/pub/macports/mpdistfiles/zlib/ - Updated daily
---> Verifying checksum(s) for zlib
---> Extracting zlib
---> Applying patches to zlib
---> Configuring zlib
---> Building zlib
---> Staging zlib into destroot
---> Installing zlib @1.2.5_0
---> Activating zlib @1.2.5_0
---> Cleaning zlib
---> Fetching openssl
---> Attempting to fetch openssl-1.0.0d.tar.gz from Index of /openssl
---> Verifying checksum(s) for openssl
---> Extracting openssl
---> Applying patches to openssl
---> Configuring openssl
---> Building openssl
---> Staging openssl into destroot
---> Installing openssl @1.0.0d_0
---> Activating openssl @1.0.0d_0
---> Cleaning openssl
---> Fetching libssh01
---> Attempting to fetch libssh-0.11.tgz from Index of /libssh
---> Verifying checksum(s) for libssh01
---> Extracting libssh01
---> Applying patches to libssh01
---> Configuring libssh01
---> Building libssh01
---> Staging libssh01 into destroot
---> Installing libssh01 @0.11_1
---> Activating libssh01 @0.11_1
---> Cleaning libssh01
---> Fetching hydra
---> Attempting to fetch hydra-5.4-src.tar.gz from Index of /hydra
---> Verifying checksum(s) for hydra
---> Extracting hydra
---> Applying patches to hydra
---> Configuring hydra
---> Building hydra
---> Staging hydra into destroot
---> Installing hydra @5.4_3
---> Activating hydra @5.4_3
---> Cleaning hydra
james-pc:~ James$
I may be wrong, but it seems like I've built it. But I don't know where the Hydra program is installed now. (At least I think that's the problem I've got.) Can anyone make sense of where the application is from that code? Thanks for any help/advice in advance
I'm new to compiling the software from source files. So I was wondering if someone can point out the (probably) glaringly obvious here which I can't see. This is basically what I've typed into Terminal and what I see now.
Last login: Tue Apr 5 19:11:20 on ttys001
james-pc:~ James$ sudo port install hydra
Password:
---> Computing dependencies for hydra
---> Dependencies to be installed: libssh01 openssl zlib
---> Fetching zlib
---> Attempting to fetch zlib-1.2.5.tar.bz2 from zlib Home Site
---> Attempting to fetch zlib-1.2.5.tar.bz2 from Index of /zlib
---> Attempting to fetch zlib-1.2.5.tar.bz2 from Index of http://mirror.aarnet.edu.au/pub/macports/mpdistfiles/zlib/ - Updated daily
---> Verifying checksum(s) for zlib
---> Extracting zlib
---> Applying patches to zlib
---> Configuring zlib
---> Building zlib
---> Staging zlib into destroot
---> Installing zlib @1.2.5_0
---> Activating zlib @1.2.5_0
---> Cleaning zlib
---> Fetching openssl
---> Attempting to fetch openssl-1.0.0d.tar.gz from Index of /openssl
---> Verifying checksum(s) for openssl
---> Extracting openssl
---> Applying patches to openssl
---> Configuring openssl
---> Building openssl
---> Staging openssl into destroot
---> Installing openssl @1.0.0d_0
---> Activating openssl @1.0.0d_0
---> Cleaning openssl
---> Fetching libssh01
---> Attempting to fetch libssh-0.11.tgz from Index of /libssh
---> Verifying checksum(s) for libssh01
---> Extracting libssh01
---> Applying patches to libssh01
---> Configuring libssh01
---> Building libssh01
---> Staging libssh01 into destroot
---> Installing libssh01 @0.11_1
---> Activating libssh01 @0.11_1
---> Cleaning libssh01
---> Fetching hydra
---> Attempting to fetch hydra-5.4-src.tar.gz from Index of /hydra
---> Verifying checksum(s) for hydra
---> Extracting hydra
---> Applying patches to hydra
---> Configuring hydra
---> Building hydra
---> Staging hydra into destroot
---> Installing hydra @5.4_3
---> Activating hydra @5.4_3
---> Cleaning hydra
james-pc:~ James$
I may be wrong, but it seems like I've built it. But I don't know where the Hydra program is installed now. (At least I think that's the problem I've got.) Can anyone make sense of where the application is from that code? Thanks for any help/advice in advance