Hi, im new here and i thought i might ask for some advice.
Ive a G5 powermac in the steel case A1047 DP 2.00
Ive tried almost everything what ive googled to try and resolve this but im having no luck, Symptom i did have originally was the boot up chime , power LED on full as normal then the screen with the ? Folder. now i know this would happen as at the time the unit did not have a harddrive installed. But when i added one, it would not boot from the dvd-cd rom OSX disk, ( by holding c on boot ) Ive reset the nvram and reset all, ive pulled teh cmos battery and tested it and left it out for 20 mins, ive pressed the small button on the logic board while everything has been disconected. ive then procceded to unplug all cable and hold my finger on the power button while plugging back in, ive moved the ram about, ( realise that they must be in pairs starting from the middle outwards, ive stripped the whole machine to check for PSU issue, ( all looks new no bulging caps ) re built it., still the same, i get all the fans on, the power light flashes twice , then pause then twice, ( apparently ram issue) or none atall? according to the specs it take 184 pin 3200. which i have tried many, the machine no longer chimes at start up as it use to, i get no video dispay,,,when i used to get the folder screen, ive heard that this could be a logic board failure? is this true or shall i waste more time on it? is there something ive missed? ive removed the cpu's and replaced them carefully, tried another battery, but it just seems odd that it came up before and now it doesnt. your help would be greatly arpechiated.
Kind regards
Leeroy!
Ive a G5 powermac in the steel case A1047 DP 2.00
Ive tried almost everything what ive googled to try and resolve this but im having no luck, Symptom i did have originally was the boot up chime , power LED on full as normal then the screen with the ? Folder. now i know this would happen as at the time the unit did not have a harddrive installed. But when i added one, it would not boot from the dvd-cd rom OSX disk, ( by holding c on boot ) Ive reset the nvram and reset all, ive pulled teh cmos battery and tested it and left it out for 20 mins, ive pressed the small button on the logic board while everything has been disconected. ive then procceded to unplug all cable and hold my finger on the power button while plugging back in, ive moved the ram about, ( realise that they must be in pairs starting from the middle outwards, ive stripped the whole machine to check for PSU issue, ( all looks new no bulging caps ) re built it., still the same, i get all the fans on, the power light flashes twice , then pause then twice, ( apparently ram issue) or none atall? according to the specs it take 184 pin 3200. which i have tried many, the machine no longer chimes at start up as it use to, i get no video dispay,,,when i used to get the folder screen, ive heard that this could be a logic board failure? is this true or shall i waste more time on it? is there something ive missed? ive removed the cpu's and replaced them carefully, tried another battery, but it just seems odd that it came up before and now it doesnt. your help would be greatly arpechiated.
Kind regards
Leeroy!