- Joined
- Feb 27, 2011
- Messages
- 5
- Reaction score
- 0
- Points
- 1
I'm a programmer using all can give me money So i work on uindos, linuz, and, obviously, OsX. I'm not a kid and I saw the birth of the Apple II.
But...
One month ago I bought a Mcbook pro 13" 2010.
First, wifi connection runs slow. Searching on the net I have found some solution. I have changed dns in my routers (!) and now wifi speed is good. I dont know why but works.
Second... If I connect ethernet cable to McBook everything is going very slowly and system becomes unusable. With external mouse connected (a standard USB mouse) the problem does not arise (!). Disconnecting cable all works fine.
[update]
Only cursor, if moved with touchpad, moves slowly and is not usable.
[/update]
I tried to change manually interface settings (network > advanced > configuration | manual > speed | 100baseTX > duplex | full-duplex), according some forum, but without solving. Plugging ethernet connector in my Mac system becomes slow and unusable.
Here there is a small lan with 3Com hardware: two routers (we have two ADSL connections, same provider but differents types), three switches, high quality cables; a dozen of computers, three or four printers, some shared device like NAS and servers. All works fine also with other Macs.
I have reinstalled ad (re)upgraded OS, obtain a flat factory installation without any non original application. But problem remains.
Any idea?
Thanks a lot
doc
But...
One month ago I bought a Mcbook pro 13" 2010.
First, wifi connection runs slow. Searching on the net I have found some solution. I have changed dns in my routers (!) and now wifi speed is good. I dont know why but works.
Second... If I connect ethernet cable to McBook everything is going very slowly and system becomes unusable. With external mouse connected (a standard USB mouse) the problem does not arise (!). Disconnecting cable all works fine.
[update]
Only cursor, if moved with touchpad, moves slowly and is not usable.
[/update]
I tried to change manually interface settings (network > advanced > configuration | manual > speed | 100baseTX > duplex | full-duplex), according some forum, but without solving. Plugging ethernet connector in my Mac system becomes slow and unusable.
Here there is a small lan with 3Com hardware: two routers (we have two ADSL connections, same provider but differents types), three switches, high quality cables; a dozen of computers, three or four printers, some shared device like NAS and servers. All works fine also with other Macs.
I have reinstalled ad (re)upgraded OS, obtain a flat factory installation without any non original application. But problem remains.
Any idea?
Thanks a lot
doc