Hi, I have a mac book pro and a samsung pico h03 projector and can't make them work together. I connected the projector with a vga adaptor to the mac and can see on the wall only a blue window. With a notebook I can immediately see the desktop projected on the wall. Anyone could help me?
problems with mac book pro and pico h03 projector
- Thread starter geasilvia
- Start date
- Joined
- Jan 23, 2008
- Messages
- 65,248
- Reaction score
- 1,833
- Points
- 113
- Location
- Keller, Texas
- Your Mac's Specs
- 2017 27" iMac, 10.5" iPad Pro, iPhone 8, iPhone 11, iPhone 12 Mini, Numerous iPods, Monterey
Does your MacBook Pro properly detect the Pico? In other words, can you open System Preference, Displays, and click on the tab "detect displays" and see your Pico?
detect displays
hi, it seems that it recognise it (because of the blue screen i see on the wall) but i couldnt see in detect display.
May it be a problem with drivers i need to download? I read on other forum that the pico should work with the pico.
thanks, i hope that with my delay you will see my answear.
hi, it seems that it recognise it (because of the blue screen i see on the wall) but i couldnt see in detect display.
May it be a problem with drivers i need to download? I read on other forum that the pico should work with the pico.
thanks, i hope that with my delay you will see my answear.
- Joined
- Dec 22, 2006
- Messages
- 26,561
- Reaction score
- 677
- Points
- 113
- Location
- Texas, where else?
- Your Mac's Specs
- 15" MBP '06 2.33 C2D 4GB 10.7; 13" MBA '14 1.8 i7 8GB 10.11; 21" iMac '13 2.9 i5 8GB 10.11; 6S
What adapter are you using? If you're using the mini displayport to VGA adapter from Apple - Apple released a firmware update for this adapter - while you have everything plugged in and turned on, try using Software Update to see if your adapter requires that update.
When you use the Detect Display button, you do not see a 2nd window for the Pico? Try moving the first window to see if it's hiding behind it.
While it's all connected and running, is there an Appearance tab in the Displays preference window?
If there is, put a check in the Mirror Displays box at the bottom.
If there is already a check, remove it.
When you use the Detect Display button, you do not see a 2nd window for the Pico? Try moving the first window to see if it's hiding behind it.
While it's all connected and running, is there an Appearance tab in the Displays preference window?
If there is, put a check in the Mirror Displays box at the bottom.
If there is already a check, remove it.
Shop Amazon
We are a participant in the Amazon Services LLC Associates Program, an affiliate program designed to provide a means for us to earn fees by linking to Amazon and affiliated sites.