- Joined
- Jan 26, 2011
- Messages
- 2
- Reaction score
- 0
- Points
- 1
Searching for a simple case for new Macbook Air 11, none fit the bill. Expensive or impractical. Made a simple, great case out of a padded FedEx mailer.
Supplies:
Padded FedEx Mailer
Clear packaging tape
Scissors
Ruler
Time: 30 minutes or less
Start by aligning mailer with flap facing down on your work surface at the top
1. Measure and trace cutout for trackpad in bottom of mailer
2. Measure and trace cutout for keyboard above trackpad
3. Measure and trace cutout for screen above keypad on top half of mailer
4. Measure and trace cutout for camera above screen
5. Open your Air and carefully slide machine into mailer, scrunch it down, but be careful not to tear the thin strip of mailer between keyboard and display
6. Shimmy the mailer to cover entire Mac Air, a little tricky since does not open flat, but mailer will stretch
7. Fold mailer flap behind screen, on side with Apple logo, pull tight, and tape with clear tape. Do NOT use the mailer's adhesive strip. Helps to secure with a small piece, then use larger strip
8. Carefully cut out side near fold of machine to allow access to USBs, power, mic, etc.
ENJOY!
Supplies:
Padded FedEx Mailer
Clear packaging tape
Scissors
Ruler
Time: 30 minutes or less
Start by aligning mailer with flap facing down on your work surface at the top
1. Measure and trace cutout for trackpad in bottom of mailer
2. Measure and trace cutout for keyboard above trackpad
3. Measure and trace cutout for screen above keypad on top half of mailer
4. Measure and trace cutout for camera above screen
5. Open your Air and carefully slide machine into mailer, scrunch it down, but be careful not to tear the thin strip of mailer between keyboard and display
6. Shimmy the mailer to cover entire Mac Air, a little tricky since does not open flat, but mailer will stretch
7. Fold mailer flap behind screen, on side with Apple logo, pull tight, and tape with clear tape. Do NOT use the mailer's adhesive strip. Helps to secure with a small piece, then use larger strip
8. Carefully cut out side near fold of machine to allow access to USBs, power, mic, etc.
ENJOY!