I woke up early morning to a loud noise like a vacuum cleaner and stumbled over to see where it was coming from and my Mac G5 running 10.5.8 was making it. I've never heard it make that noise before it was SOOO loud. The computer had been running a screensaver and playing a radio program from a website I was streaming to my radio using an FM transmitter. I've done that for years with no problems.
Anyway, I shut it down, and restarted and it was fine. I didn't see the fans spinning though. I installed iSTAT and it's showing the CPU A exhaust at 847 rpm and the CPU A intake at 789 rpm. I don't see the fans spinning on the back of it though I usually see when I look into the computer through the holes in the front. When I check the back of the computer they aren't spinning either. What's strange in that it also gives reading for CPU B and I only have one processor I think.
The CPU A die temp goes from about 116 to 130. The rest are:
Drive Bay 86.9
Logic Board Inlet 83.8
Logic Board ambient 95.5
Logic board Backside 112.3
memory controller heatsink 140.3
processor card 115.2
SMART Disk reads sometimes nothing and sometimes 111 I think--what is that anyway?
Would anyone PLEASE know what's going on with my computer? How can I have fan readings with nothing spinning. They both are down. Could it be the logic board as they both went out at once?
Would REALLY appreciate any help! A bit frantic here!
Anyway, I shut it down, and restarted and it was fine. I didn't see the fans spinning though. I installed iSTAT and it's showing the CPU A exhaust at 847 rpm and the CPU A intake at 789 rpm. I don't see the fans spinning on the back of it though I usually see when I look into the computer through the holes in the front. When I check the back of the computer they aren't spinning either. What's strange in that it also gives reading for CPU B and I only have one processor I think.
The CPU A die temp goes from about 116 to 130. The rest are:
Drive Bay 86.9
Logic Board Inlet 83.8
Logic Board ambient 95.5
Logic board Backside 112.3
memory controller heatsink 140.3
processor card 115.2
SMART Disk reads sometimes nothing and sometimes 111 I think--what is that anyway?
Would anyone PLEASE know what's going on with my computer? How can I have fan readings with nothing spinning. They both are down. Could it be the logic board as they both went out at once?
Would REALLY appreciate any help! A bit frantic here!