3.5mm headphone jack snapped off inside headphone port.

Joined
Feb 18, 2008
Messages
251
Reaction score
1
Points
18
Location
Kent, UK
Your Mac's Specs
Macbook White 2.16GHz 2Gb OS X 10.5, 16Gb iPhone 3G Black
Ok, so i have a problem.... I just picked up my macbook (white) and unplugged the headphones that were in it, only to find that the end of the 3.5mm headphone jack has snapped off inside the macbook's headphone socket. Obviously this means the macbook's speakers are disabled and i cant plug any speakers or other headphones into the port. My warrenty expired last august, so i cant simply take it in and get it fixed for free.

Im no mechanic... but how easy do you think it would be to take the casing off of the macbook and get this broken piece out? is it as simple as this?

Any help greatly appreciated!!

Thanks,

Luke
 
Joined
Feb 2, 2008
Messages
447
Reaction score
7
Points
18
Location
Traverse City MI
Your Mac's Specs
15.4" MacBook Pro 4GB 500GB 2.4Ghz
If your no mechanic, Please dont try to take the case off.

I suggest using a Magnet or something that will provide leverage and will be able to get the little guy outta there.
I would maybe just take it to a computer specialist and see what they can do.
They might come up with some rig that will get it out of there or you might have to pay a little bit o' cash and get the thing fixed the right way.

Honestly your in a little pickle right now. I would just take it to a specialist and get 'er looked at :)
 
Joined
Jul 18, 2007
Messages
3,184
Reaction score
93
Points
48
Location
Central California
Your Mac's Specs
2.16GHz C2D MacBook w/ 2GB RAM & 120GB HD. HTC Droid Incredible.
This isn't the first time I've read about this happening. How does it even happen!
 
Joined
Nov 15, 2006
Messages
184
Reaction score
2
Points
18
Location
San Francisco, CA
I am not sure opening the case will help you very much at all. Typically female mini plug sockets are closed and sodered directly to a board. I would get some of the 5lbs test double stick tape, put it on the tip, push it firmly to the stuck part and hope it follows it out.
Can you see the broken off tip? if so you might be able to get needle nose tweezers around it?
 
OP
lukenn77
Joined
Feb 18, 2008
Messages
251
Reaction score
1
Points
18
Location
Kent, UK
Your Mac's Specs
Macbook White 2.16GHz 2Gb OS X 10.5, 16Gb iPhone 3G Black
This isn't the first time I've read about this happening. How does it even happen!

haha, well they were fairly old headphones and i needed to wriggle the plug around to get sound out of both ear pieces, so that suggests the 3.5mm jack was bent and weakened already... i was watching a film on my bed, got up to get some food and put my computer down on the bed, im guessing the un-even surface pushed against the jack and it just snapped off.... so completely my fault really.
 
OP
lukenn77
Joined
Feb 18, 2008
Messages
251
Reaction score
1
Points
18
Location
Kent, UK
Your Mac's Specs
Macbook White 2.16GHz 2Gb OS X 10.5, 16Gb iPhone 3G Black
I am not sure opening the case will help you very much at all. Typically female mini plug sockets are closed and sodered directly to a board. I would get some of the 5lbs test double stick tape, put it on the tip, push it firmly to the stuck part and hope it follows it out.
Can you see the broken off tip? if so you might be able to get needle nose tweezers around it?

Yeah i think your right there, i just googled for macbook motherboards and saw they are as you described.

Tape is a very good idea! I hadnt thought of that. I was on the verge of thinking a very very small amount of glue might be wise... but then again id have to leave it to set not knowing whether its spilled out of the sides and is sticking to the inside of the female socket. I will definitely give tape a shot then!

I can see the piece yes, but its 4mm or so inside the socket, so getting tweezers round it with enough grip would be nearly impossible. I'll give tape a try as soon as i find some really strong stuff.
 
OP
lukenn77
Joined
Feb 18, 2008
Messages
251
Reaction score
1
Points
18
Location
Kent, UK
Your Mac's Specs
Macbook White 2.16GHz 2Gb OS X 10.5, 16Gb iPhone 3G Black
If your no mechanic, Please dont try to take the case off.

I suggest using a Magnet or something that will provide leverage and will be able to get the little guy outta there.
I would maybe just take it to a computer specialist and see what they can do.
They might come up with some rig that will get it out of there or you might have to pay a little bit o' cash and get the thing fixed the right way.

Honestly your in a little pickle right now. I would just take it to a specialist and get 'er looked at :)

yeah you're right, i woulnt want to cause more damage. I'll give a magnet a shot, although im not sure if i have any powerful enough to get it past the little bumps and groves that are inside the socket.

Last resort... i'll take it to a specialist and see how much it would cost and how they would do it.

Thanks for your help everyone!
 
Joined
Nov 15, 2006
Messages
184
Reaction score
2
Points
18
Location
San Francisco, CA
yeah you're right, i woulnt want to cause more damage. I'll give a magnet a shot, although im not sure if i have any powerful enough to get it past the little bumps and groves that are inside the socket.

Last resort... i'll take it to a specialist and see how much it would cost and how they would do it.

Thanks for your help everyone!

Odds are they will try the same things as u then just desoder and replace. I thought about also saying the smallest drop of crazy glue but you would need to be very careful to not weld it in perm. If your handy with a soder iron you could tack flux to it and see if that pulls it out.
 
OP
lukenn77
Joined
Feb 18, 2008
Messages
251
Reaction score
1
Points
18
Location
Kent, UK
Your Mac's Specs
Macbook White 2.16GHz 2Gb OS X 10.5, 16Gb iPhone 3G Black
ok, so glue didnt work, and neither did tweezers. i took the case off following instructions on ifixit.com and had a look from the inside.... there is definitely no way in from the back. all back together and works fine... except the sound still :(
 
Joined
Nov 15, 2006
Messages
184
Reaction score
2
Points
18
Location
San Francisco, CA
ok, so glue didnt work, and neither did tweezers. i took the case off following instructions on ifixit.com and had a look from the inside.... there is definitely no way in from the back. all back together and works fine... except the sound still :(

Well you have little to loose really. I would try the smallest amount possible of epoxy or crazy glue and see if that is enough to remove it. The only other suggestion I can think of would be to heat up a needle and make a small hole on the opposite side of the jack where u can push it out instead of pulling.
 
Joined
Mar 25, 2009
Messages
3
Reaction score
0
Points
1
Location
Parksville, BC
Your Mac's Specs
Macbook pro 2009, Macbook 2007, iPhone 3G, Power PC G5
This solution worked

Hi, I trolled a lot of forums regarding this problem, this one actually worked. I tried the dental pick approach first, it didn't work at all. I dabbed a small amount of glue (Household Goop is the product I used) on the end of a nail, but to protect the rest of the computer and ensure I didn't glue the nail into the slot as well, I used a straw, cut to fit and placed in the female end of the jack around the piece that was stuck, acting as a sleeve, I let the glue cure for 24 hours and pulled out the broken piece as easy as pie.
 
Joined
Apr 1, 2010
Messages
2
Reaction score
0
Points
1
When this happened to me a few years ago I used super glue and a toothpick. Let it sit in there for a few minutes then pulled it out with success.
 
Joined
Aug 10, 2010
Messages
2
Reaction score
0
Points
1
Headphone Jack Part ID

I have the same problem of a tip of a headphone plug snapped off in my a1181 macbook audio input jack. I tried a multitude of methods trying to get it out, including paperclips, tiny flathead screw drivers, glue on all sorts of different objects to pull it out, and now it is permanently fastened in there. I got too antsy this afternoon and tried too many things at once. Instead of replacing the entire logic board ($400, or $60 for sketchy ebay buys), I am wondering if anybody can point me in the direction of who manufactures the actual part I need to remove, and solder back in. Does anybody know where that part information might be available? I am planning on buying it off of a place like digikey.com. Does anybody have any ideas? Thanks a bunch.
 

chscag

Well-known member
Staff member
Admin
Joined
Jan 23, 2008
Messages
65,248
Reaction score
1,833
Points
113
Location
Keller, Texas
Your Mac's Specs
2017 27" iMac, 10.5" iPad Pro, iPhone 8, iPhone 11, iPhone 12 Mini, Numerous iPods, Monterey
I doubt you can just buy the part, but even if you could, you do realize that components on the logic board are surface mounted? In order to remove a surface mounted component without destroying the integrity of the logic board you would need a specialized solder removal tool and a good knowledge of how to use it.

If the headphone tip can not be removed, the Apple recommended repair is to swap out the entire logic board. If you wish, try the Mac parts folks at iFixit: The free repair manual.

Regards.
 
Joined
Aug 10, 2010
Messages
2
Reaction score
0
Points
1
Thanks for your reply and I am familiar with ifixit. I understand this will be extremely difficult, will need a solder removal tool, the space I am working with is tiny, and I can't just goop a bunch of solder in there and hope it will work. Luckily I have some really experienced people willing to help my out with the labor, they just don't want to track down the part. Does anybody know where I can look to find this information? If push comes to shove I will end up buying a new logic board.
 

chscag

Well-known member
Staff member
Admin
Joined
Jan 23, 2008
Messages
65,248
Reaction score
1,833
Points
113
Location
Keller, Texas
Your Mac's Specs
2017 27" iMac, 10.5" iPad Pro, iPhone 8, iPhone 11, iPhone 12 Mini, Numerous iPods, Monterey
To be honest, you may be better off purchasing a refurbished logic board rather than taking the chance of first trying to find the part, then, successfully removing it and replacing it without damage to the LB.

I've been in the computer repair and electronics repair field for many years, and even after all the experience working with solder removal stations, I have personally ruined several boards in the process. To put it mildly, it's not easy.

Take a look in the back (advertising section) of MacWorld Magazine, there's usually 4 or 5 authorized Mac parts resellers who stock refurbished logic boards. Prices seem fair compared to Apple.

Good luck with the repair and keep us posted.

Regards.
 
Joined
Dec 29, 2010
Messages
1
Reaction score
0
Points
1
got my minijack out!

I know this post started a while ago, but I came across it while desperately looking for a solution, and just now want to share how I managed to save my little MBP 13"!

I used superglue gel, a small screw and a straw. Actually, among all the frantic googling I did, I found a post which I followed - they had pictures and that reassured me.

Some other sites people said you should drill a hole in the mini jack piece and stuff like that... way too scary for me ;)

Anyways, here is the step by step I followed: Como salvar su Mac cuando se ha roto un mini-jack dentro del enchufe | Zonpple

(you can use Google to translate if needed)

Hope you manage to fix your mini jack port! ;D

Francisco.
 
Joined
May 28, 2011
Messages
1
Reaction score
0
Points
1
Simple(r) fix

Hi all!
I was googling this same problem, and considered trying the glue-and-straw fix. But first I bought a pair of very pointy tweezers at a beauty shop, to try to pick out the stuck jack tip. Looking inside, I could see the end of the tip has a "butt" sticking out, which I tried to grad and pull. But the tweezers were too big, so I could only graze the butt.

However! When I re-inserted the broken jack (the other half still connected to the cable), the whole tip lodged itself back in the jack, and I simply pulled the plug out in one piece!

So my contribution to this discussion is to use some metal object to (carefully) rough up the back of the lodged tip (while inside the headphone jack of the mac). If you're as lucky as me, you can then use the broken jack cable to remove the tip.

Guess you just need to be careful not to damage the headphone plug on the mac while you're going at it :)

broken_jack_tip.jpg
 

Shop Amazon


Shop for your Apple, Mac, iPhone and other computer products on Amazon.
We are a participant in the Amazon Services LLC Associates Program, an affiliate program designed to provide a means for us to earn fees by linking to Amazon and affiliated sites.
Top