I dropped my iMac G5 onto a ceramic tiled floor. I was amazed that it worked when i snapped it back together, but then it stopped starting up all the way. I opened it again and noticed that this strange little piece of circuit board-type material was broken in half. It is a little boomerang-shaped piece that fixes to one of the corner screws. In the attached pic I have it flipped over, and the pink photoshopped marking is the area it normally occupies by sticking from the screw-hole through a slot and inside the corner.
Could this be causing my machine to turn off suddenly during startup?
Thanks!
Jenn
Could this be causing my machine to turn off suddenly during startup?
Thanks!
Jenn