- Joined
- Nov 4, 2006
- Messages
- 8,704
- Reaction score
- 447
- Points
- 83
- Location
- twin cities, mn, usa
so i just bought this fan from radio shack:
details here
i was assuming it would have a cord and standard plug at the end. of course all it had was two thin-ish black wires about 6" long poking out of it with bare ends.
if i crimp a standard cord/plug - like the male end and a few feet of cord from an extension cord - on to those two wires will it work or am i just going to trip a circuit breaker (or worse).
the fan is 115VAC 60Hz 20W and it does say "impedance protected".
details here
i was assuming it would have a cord and standard plug at the end. of course all it had was two thin-ish black wires about 6" long poking out of it with bare ends.
if i crimp a standard cord/plug - like the male end and a few feet of cord from an extension cord - on to those two wires will it work or am i just going to trip a circuit breaker (or worse).
the fan is 115VAC 60Hz 20W and it does say "impedance protected".