Printer

I have a CRT/DVD IMAC with 10.3 loaded. Where can I get a printer that will work with this setup?

lilguy said:

I have a CRT/DVD IMAC with 10.3 loaded. Where can I get a printer that will work with this setup?

Click to expand...

Best Buy
Target
Wal*Mart
Newegg.com
Macmall.com
Amazon.com
eBay
Craigslist
etc., etc., etc.

Pretty much anywhere you can buy a printer.
Just be sure that the printer manufacturer has included drivers for OS X.

I have been told at BB that my system is to old for new printer function. That I need to find a used stuff dealer.

lilguy said:

I have been told at BB that my system is to old for new printer function. That I need to find a used stuff dealer.

Click to expand...

And they're wrong.
Here are the specs from the very first printer I found on their website:
HP - Deskjet Multifunction Printer/ Copier/ Scanner - F4280

Minimum System Requirements
Mac: Intel® Core™, G3, G4 or G5 processor, OS X 10.3.9, 10.4, 10.5; 256MB RAM

Click to expand...

You can buy a printer for your setup just about anywhere.
Just check the System Requirements before you buy it.

Its 10.3.0. Will not work. How should i proceed ?

lilguy said:

Its 10.3.0. Will not work. How should i proceed ?

Click to expand...

Run Software Update.
Then you'll get the 10.3.9 update.

My modem and aol are so slow that it kicks out before any software can be down loaded. For years we ran our Dental practice on a Mac software but the company failed and we had to switch to Windows/ Dell. I have 2 crt I macs left
and would like to use them at home. Maybe its time to turn them into aquariums.

I have a Mac classic I also would love to use for word processing, but no printer.

Get off of AOL,they spy and cut you off. If you want dail up check out fastermac.net. You can find mac classic printers at the thrift store. Look for Canon and Epson printers with the appletalk jack on the back. You can also network to many HP laser printers that use postscript.

Thrift store?

You're going to have to bite the bullet and download the 10.3.9 update. It might take a while but when installed, it will open many more printers to you. If need be, you can go to a library to download it and use a USB key to transfer it.

Here is the combo update and here is some info on it.

lilguy said:

Thrift store?

Click to expand...

Yes, thats where you find old stuff for old Macs cheeper than eBay. I got an Oki C5100 color laser printer for $12.00,it just needed to be reset. Just got last week a B&W G3 another $12.00. Saw several HP laser printers today..$4.00.
An Epson 800 with that apple talk jack on the back...$4.00.

My aol kicks out before anything can get started. I am obviously missing something because my high speed will not work when disconnected from my Dell and plugged into the Imac. Wife has been telling me for years to scrap it.

I assume you're using DHCP - this would be the most likely setup. Is your Mac setup for DHCP? Are you sure the network card works?

If you have high speed on your Windows machine, why not just download the update on that machine?

Which version updates will I need. I have to go from 10.3.0 to 10.3.9 do I need 9 down loads.

lilguy said:

Which version updates will I need. I have to go from 10.3.0 to 10.3.9 do I need 9 down loads.

Click to expand...

vansmith said:

Here is the combo update and here is some info on it.

Click to expand...

Install the combo update - all you'll need. To be safe, make a backup beforehand in case something goes wrong.

Well, we transfered from the Dell to the Imac and it will not let us install without
password that no one can remember because they were obsolete 6 years ago.
We do not have the start up disc for it anymore. Time to terminate with extreme prejudice ?

IT'S LOADING!!!!!!!!! THERE WAS NO PASSWORD. thanks to all. will be back shortly

Thank you all. Mac Lives to fight another day.

I can not find the HP5200 in the chooser after install, keeps waning about no contact with HP 5700. Can not find anything in system left to direct toward 5700. Almost there.

The system looks for the wrong printer when started. Can not get it to default to new printer. deleted old printer but will not activate new printer in chooser.
Any thoughts appreciated.