05-28-2012, 09:46 PM #16
- Member Since
- Sep 03, 2010
- Charlotte, NC
- mid 2010 Mac Mini OS 10.11.6 (ElCap), 2.66 GHz C2D, 8GB RAM, 30 in. Cinema Display
westom...my ADAM speakers are new. I was going to wait until I had my UPS and plug them in a try them. I wanted to hear them, so I went ahead and plugged them into the wall outlet and they POP every time the AC comes on or I switch ON the light! I have used other/cheaper speakers in the past and they never did that! Will an online UPS eliminate that? What do you recommend that I can do to stop this? As I said, other speakers have never done this.
These POPS will ruin my new speakers. I know it is not good. I have to solve this problem. Can you help?
05-28-2012, 10:31 PM #17
- Member Since
- Jan 03, 2010
A pop is noise. Generally many RFI/EMC/EMI engineers are bald. Itís not an accident. These are some of the more challenging anomalies.
Generally a pop can come through an inferior power supply. Or is a current passing through the inputs.
Appreciate this example. A ground loop. A connects to B connects to C. Noise is an electric current. That means a loop must exist. Noise loop might be through A, B, then C. And back to A. The defect that completes that loop might be C. But disconnect A and the noise stops. Many will quickly assume A created the noise.
One path that can be part of the loop is safety ground (the third prong). You can use a cheater plug (a three to two prong adaptor) to temporary break that loop. But that is only to find parts of the loop path; not an acceptable solution.
If the power supply is inferior, then a UPS in battery backup mode might also create noise that would pass through the supply. Power the speakers from a UPS with its power cord disconnected from a wall receptacle. Learn how good that speaker's power supply is.
A pop generated by other appliances should not be heard. However, the solution to eliminating excessive noise is best implemented at the noise generator.
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By MrTutt in forum Other Hardware and PeripheralsReplies: 4Last Post: 10-20-2012, 05:29 PM
By kevn in forum Other Hardware and PeripheralsReplies: 3Last Post: 02-20-2011, 11:03 PM
By AssetBurned in forum Other Hardware and PeripheralsReplies: 0Last Post: 05-06-2009, 08:32 PM
By Geardaddys in forum Other Hardware and PeripheralsReplies: 1Last Post: 05-21-2008, 05:17 PM
By Carolyn in forum Other Hardware and PeripheralsReplies: 7Last Post: 03-22-2004, 09:40 PM