Results 1 to 7 of 7
  1. #1
    Iomega Drive Not Seen

    Member Since
    Jan 10, 2012
    Posts
    3
    Iomega Drive Not Seen
    Hi, I have an iomega ultramax 500 external dive which was working just fine yesterday morning but now is not mounting to my mac, I have an imac and am running osx 10.7.2, I have tried moving the cables around and a usb cable no difference is made, on the system information under fire it shows an unknown device which must be the drive as it's the only thing connected, the drive has my time machine back up on as well as some non backed up photos and other documents, I am not technically minded an am a complete loss and any help would be much appreciated.

    Thank you

    J.

  2. #2
    Iomega Drive Not Seen
    chscag's Avatar
    Member Since
    Jan 23, 2008
    Location
    Fort Worth, Texas
    Posts
    45,269
    Specs:
    27" iMac i5, 3.2 GHz, iPad 3, iPhone 5c, iPhone 6+, 3 iPods, Yosemite
    Hard drives can die suddenly without warning and the same applies whether it's an internal or external model. The electronics on the drive may have failed and now it won't mount.

    If the data on the drive is important, you can try data recovery software. If that doesn't work, you may be able to remove the drive from the iOmega case and mount it in an external carrier or with an adapter and get at your data that way. However, there is no guaranty that it will work.

  3. #3
    Iomega Drive Not Seen

    Member Since
    Jan 10, 2012
    Posts
    3
    I'm hoping that's the worst case scenario:-0

  4. #4
    Iomega Drive Not Seen

    Member Since
    Jan 12, 2012
    Posts
    4
    If it truly has failed, externally mounting it is the way to go. If you are just going to miss time machine backups count yourself lucky. I had a WD drive in a previous imac fail and was only able to download files in 10 min intervals with 1hr resting periods between but was able to save all my project data, well worth the labor if the data is dire.

  5. #5
    Iomega Drive Not Seen
    Ttaylor394's Avatar
    Member Since
    Feb 15, 2011
    Location
    West Virginia
    Posts
    382
    Specs:
    13in rMBP 2014 Yosemite
    #1 go to fix all question coming at you...

    did you restart your Mac?

    heres number 2

    is the hard drives power chord plugged in?

    good luck
    21.5"iMac i3 3.06:running 10.7  500GB HD  16GB DDR3  Magic Trackpad  Black iPhone4 32GB  White iPhone4 16GB  Apple Extreme Airport Base Station 

  6. #6
    Iomega Drive Not Seen

    Member Since
    Jan 10, 2012
    Posts
    3
    Hi, I have restarted the machine, checked power, cables etc (replaced firewire cable) and also done a RAM reset thingy, all to no avail, looks like external mounting is going to be the way to go, all I need do now is figure out how to do it!

  7. #7
    Iomega Drive Not Seen
    chscag's Avatar
    Member Since
    Jan 23, 2008
    Location
    Fort Worth, Texas
    Posts
    45,269
    Specs:
    27" iMac i5, 3.2 GHz, iPad 3, iPhone 5c, iPhone 6+, 3 iPods, Yosemite
    Be careful removing it from the original iOmega case. It should be mounted to an adapter connector inside which is part of the case itself. If you can get the case part way off you should be able to move the drive away from the connector.

    Also take note of which interface it's using. It should be SATA but make sure before you buy an external carrier.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. iomega zip drive
    By ankhseeker in forum Other Hardware and Peripherals
    Replies: 10
    Last Post: 12-09-2014, 11:42 PM
  2. iomega drive
    By DEAN BAEHLER in forum OS X - Operating System
    Replies: 10
    Last Post: 10-31-2013, 01:44 PM
  3. Connecting An Old Iomega Drive
    By kooloodee in forum Apple Desktops
    Replies: 2
    Last Post: 06-20-2009, 08:19 AM
  4. Iomega drive Question
    By mwright in forum Apple Notebooks
    Replies: 0
    Last Post: 04-01-2006, 12:55 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •