Results 1 to 8 of 8
  1. #1

    Member Since
    May 08, 2011
    Old software won't work on new MacBook Pro

    I'm not sure I understand the problem here. I had a older iMac and had decided to upgrade to Snow Leopard. All my software still worked and all was smooth until my hard drive died and I was reverted back to the old OS because it was all I had backed up on my external drive.

    This past weekend, I went out and purchased a new MacBook Pro,

    Model Name: MacBook Pro
    Model Identifier: MacBookPro8,2
    Processor Name: Intel Core i7
    Processor Speed: 2.2 GHz
    Number of Processors: 1
    Total Number of Cores: 4
    L2 Cache (per Core): 256 KB
    L3 Cache: 6 MB
    Memory: 4 GB
    Boot ROM Version: MBP81.0047.B26
    SMC Version (system): 1.69f3
    Serial Number (system): C02GTAMRDV7L
    Hardware UUID: 0029B29D-9753-5BB1-9327-B0ABCA76FB31
    Sudden Motion Sensor:
    State: Enabled

    Now none of the old programs I had will install on this new computer. The guys at the Mac store told me would would not be a problem when I asked if I would be able to use my old version of Photoshop CS2. Well that didn't turn out and now I find I am having the same problem with other software. Mainly, Officemac as that is what I have used in the past 6 years for making invoices for my work.

    All of these programs give a message error telling me the "You can't use these programs because PowerPC applications are no longer supported." I didn't have a PowerPC machine previously, I had one of the first Dual core intel machines.

    Can anyone explain? I was also unable to use Migration asst when setting up. I assume this was because I was trying to pull it from an external hard drive (MyBook), but not sure.

    Thank you for any help,

  2. #2

    louishen's Avatar
    Member Since
    Oct 22, 2007
    Mac Mini Core i7 2012 | White 2009 MacBook 2 Ghz | 733 Mhz G4 Quicksilver
    If its a new mac then it has OSX Lion installed.

    Lion no longer supports applications written solely for the old PowerPC macs, they were previously allowed to run with an emulation layer, but that has now been dropped with Lion.

    You will either have to upgrade Office and photoshop or look at alternative programs, the people here will be able to help with alternatives depending on your needs for Office and Photoshop type tasks

    Tell us exactly what you use Photoshop and office for?
    Member of the Month September 2008 & August 2012 | Found advice useful? use the rep system

  3. #3

    Member Since
    May 08, 2011
    Thank you for the reply. I mostly just use Photoshop for fixing up scanned negatives for large format digital printing. I am a 4x5 film shooter, so most of my work is done in a darkroom, but on occasion, when a larger print is needed, I need to scan and digitally try to match my normal prints.

    My bigger upset is the invoices and the $400 I spent on Rosetta Stone that no longer seems to work either. That is upsetting to a point I can not explain.

  4. #4

    Member Since
    May 08, 2011
    Quote Originally Posted by louishen View Post
    If its a new mac then it has OSX Lion installed.

    Lion no longer supports applications written solely for the old PowerPC macs,
    Am I misunderstanding, BTW? I did not think the iMac w/ dual core intels were considered "PowerPC".

  5. #5

    dtravis7's Avatar
    Member Since
    Jan 04, 2005
    Modesto, Ca.
    iMac 2010 27" QuadI7, iMac 2008 10.10.5, Macbook2007 10.7.5, Mac Mini 10.7.5, iPhone 3GS Note 8!
    Snow Leopard and Leopard had Rosetta which ran Power PC Apps on Intel Macs. Progress has to be made and with the move to a true 64-Bit OS that Lion is, it no longer supports Rosetta and thus no Power PC apps will run.

    The Power Pc has been dead for years now and Apple is moving forward. Not sure what to tell you. You can probably get an update for Rosetta Stone, but Photoshop that will run on Lion will cost you a lot.


  6. #6

    Member Since
    Apr 02, 2012
    Angry big alsta
    having similar problems, just bought a 2011 macbook pro. Can't install hardware ( Mackie 400f sound mixer) it says power pc apps are no longer supported. grrrrrrrrr any advice would be greatly appreciated.

  7. #7

    chas_m's Avatar
    Member Since
    Jan 22, 2010
    Victoria, BC
    Mid-2012 MBP (16GB, 1TB HD), Monoprice 24-inch second monitor, iPhone 5s 32GB, iPad Air 2 64GB
    Here's the basic problem: you aren't updating your software often enough.

    You don't have to update it every time Adobe or MS tell you there's a new version available, but neither can you ignore updates for years on end. If nothing else, you open yourself up to serious security problems with that approach. Particularly when Apple makes NO SECRET of the fact that they are deprecating old technologies that your old programs are relying on.

    The solution is pretty easy: upgrade your Photoshop. Upgrade your Office. Contact Rosetta Stone and they will send you the right version for your newer machine.

    Because you waited so very long, some of these upgrades will be pricey. They would have been less pricey overall if you had, for example, upgraded every OTHER release of Adobe Photoshop and thus kept up-to-date ... if fact CS3 still works on Lion, and Microsoft Office 2008 is still supported under Lion.

    As a general rule of thumb, new OS version plus very old software = bad mix.

  8. #8

    chscag's Avatar
    Member Since
    Jan 23, 2008
    Fort Worth, Texas
    27" iMac i5, 3.2 GHz, iPad 3, iPhone 5c, iPhone 6+, 3 iPods, El Capitan
    Quote Originally Posted by big alsta View Post
    having similar problems, just bought a 2011 macbook pro. Can't install hardware ( Mackie 400f sound mixer) it says power pc apps are no longer supported. grrrrrrrrr any advice would be greatly appreciated.
    The best advice we can give you is to contact the Mackie folks and ask if they have updated drivers - software that will work with Lion. The older software that came with the Mackie is out of date since it is comprised of PPC code. PPC code is no longer supported by Apple on its newest operating system, Lion.

    And before you ask.... you can not downgrade your new MBP to run any other version of OS X. It will only run Lion or later versions of OS X.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. New Macbook Pro, Old Adobe Software, does it work?
    By oldappleuser in forum Switcher Hangout
    Replies: 3
    Last Post: 02-02-2013, 01:41 PM
  2. Knoppix Won't Work On Macbook Pro
    By macuser1232 in forum Running Windows (or anything else) on your Mac
    Replies: 5
    Last Post: 10-01-2012, 10:51 AM
  3. YouTube won't work on MacBook Pro!
    By zmw in forum OS X - Operating System
    Replies: 2
    Last Post: 05-16-2012, 12:37 AM
  4. .app game file won't work on MacBook Pro
    By Amster in forum Switcher Hangout
    Replies: 4
    Last Post: 04-20-2012, 02:45 PM
  5. HELP! Macbook Pro Display won't work!
    By cruukedeye in forum Apple Notebooks
    Replies: 1
    Last Post: 02-25-2010, 04:58 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts