Results 1 to 8 of 8
  1. #1
    can't import video Canon HV20 on a Macbook Pro

    Member Since
    Nov 27, 2009
    Posts
    6
    can't import video Canon HV20 on a Macbook Pro
    I'm new to this forum and new to the world of Macintosh.
    I'm from The Netherlands so my english might have some errors here and there.

    I've a 2 year old Canon HV20. I've searched through the forum and found a similar problem with no solution (yet).

    I own a new Macbook Pro with iMovie '09 and running Mac OS X 10.6.2

    The firewire input is the 800mbit/s version so the standard Canon firewire cable wont work.
    I've bought another cable (4 to 9 pins) and I want to know how the Mac will tell me if the camera is there or not.
    If I open iMovie and I can't see the camera
    If I open iPhoto and hook up the USB cable I can see and import pictures.

    I've tested the camera with the original cable on Windows and it works.

    I think the cable is not good, but to make sure I wont be buying another faulty cable, are there other alternatives.
    I've seen a conversion plug for the original Canon cable.

    I'm quite upset Apple didn't include that in the 2100 euro package

  2. #2
    can't import video Canon HV20 on a Macbook Pro
    slayer's Avatar
    Member Since
    Dec 01, 2009
    Posts
    2
    Specs:
    Mac Pro 3.2 GHz Quad-Core Xeon 8GB Ram ATI Radeon X1900 XT
    HV20 and OSX
    Have you gotten anywhere with your "issue"? I too have an HV20 but it's not quite 2 years old. I've been using it for iMovie 06, 08 and 09 as well as Final Cut. For the most part, it's a fine piece of equipment for my needs plenty of camera. So what's my problem? I just upgraded to Snow Leopard (OXX 10.6.2) and now I can't get any of my programs to "find" or recognize the HV-20. They're fine with my Casio, Panasonic and other Canons (SD Card models). But the HV-20 is simply not being seen by my Mac Pro. I'm sure there is something was something lost during the upgrade but for now I've not been able to find a resolution on line.
    Please let me know if you have made any progress with your problem and if possible, point me in the "find the answer here" direction. Thanks...
    Jonathan

  3. #3
    can't import video Canon HV20 on a Macbook Pro
    xstep's Avatar
    Member Since
    Jun 25, 2005
    Location
    On the road
    Posts
    3,231
    Specs:
    2011 MBP, i7, 16GB RAM, MBP 2.16Ghz Core Duo, 2GB ram, Dual 867Mhz MDD, 1.75GB ram, ATI 9800 Pro vid
    To see of OS X is even seeing the camera, use System Profiler in the Utilities folder. Open that after hooking up and turning on the camera. Then click on the Firewire entry under Hardware.

    The camera should be connected via firewire and the USB cable should not be connected.
    CameraTime - Time lapse photography for novice and advanced users.

    When asking questions, post the version of your software. You'll receive better answers.

    Please post your results to the thread as it is good feedback.

  4. #4
    can't import video Canon HV20 on a Macbook Pro
    slayer's Avatar
    Member Since
    Dec 01, 2009
    Posts
    2
    Specs:
    Mac Pro 3.2 GHz Quad-Core Xeon 8GB Ram ATI Radeon X1900 XT
    xstep,
    As stated in my previous post, I'm running the latest version of Snow Leopard (10.6.2). Before the upgrade the HV20 played fine with my Mac Pro. Now nothing. System Profiler doesn't show it after being connected and powered on (which I didn't mention above). For now my work around is to import my video to my old Mac Book and then copy it over the lan to the Mac Pro. I'm hoping enough people will complain to Apple to get a patch sometime in the future but any suggestions would be welcomed.
    Jonathan
    P.S. I didn't even know the camera has a USB connection; I've only ever used Fire Wire.

  5. #5
    can't import video Canon HV20 on a Macbook Pro
    xstep's Avatar
    Member Since
    Jun 25, 2005
    Location
    On the road
    Posts
    3,231
    Specs:
    2011 MBP, i7, 16GB RAM, MBP 2.16Ghz Core Duo, 2GB ram, Dual 867Mhz MDD, 1.75GB ram, ATI 9800 Pro vid
    Please do complain to Apple. I've been seeing this problem being reported for firewire cameras connected to OS X 10.6.x.

    As a side note. I did a clean install of 10.6 on a firewire drive and connected my old firewire miniDV camera. So far I'm mostly lucky and the camera is seen, although it looks like upgrading to 10.6.2 may have helped out another issue. I have found that one of my other firewire drive enclosures combined with the camera connected causes what can only be described as a lockup of the system. The drive in question is my media asset drive.
    CameraTime - Time lapse photography for novice and advanced users.

    When asking questions, post the version of your software. You'll receive better answers.

    Please post your results to the thread as it is good feedback.

  6. #6
    can't import video Canon HV20 on a Macbook Pro

    Member Since
    Nov 27, 2009
    Posts
    6
    In my case it was a bad or wrong brand cable

    I got me a Belkin cable and it works under iMovie running 10.6.2

  7. #7
    can't import video Canon HV20 on a Macbook Pro

    Member Since
    Jun 06, 2010
    Posts
    3
    I am running Mavericks (OS X 10.9.1), and my Canon HD camera HV20 is no longer recognized.
    I am the family chronicler, having made 52 movies about the grandchildren. No camera since the HV20 has come close to its quality, unless you go to the $3000 professional stuff.
    The point is, I am busted back to the stone age. Changing settings does not solve the problem.
    My iMac is also screwed, since I upgraded to snow leopard. It will not recognize the HV20V.

    It is a sad day when Apple begins sabotaging earlier operations. Microsoft did it for years. That was fraud.

    Please help, send us a patch. Send us a life boat.
    I'm not a teckie, but I have been very productive with tools that work for me.
    FCP will not find my camera. iMovie neither.
    This is an emergency.

  8. #8
    can't import video Canon HV20 on a Macbook Pro
    MightyGem's Avatar
    Member Since
    Nov 29, 2010
    Location
    Warrington, UK
    Posts
    1,823
    Specs:
    PPC Mini, 10.4.11. Intel Mini, 10.6.8. White MacBook, 10.9.5. iPhone 3GS.
    Can you still connect to any computer? Try a new/different Firewire cable?

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Exporting movies from Canon HV20 to iMovie 10.0.3 on Mavericks
    By Winetrek in forum OS X - Operating System
    Replies: 1
    Last Post: 05-29-2014, 03:49 PM
  2. Replies: 23
    Last Post: 03-18-2010, 12:28 PM
  3. Streaming video online using Canon HV20
    By lexmex in forum Movies and Video
    Replies: 1
    Last Post: 11-24-2009, 02:10 PM
  4. Capturing Video w/ FCE and Canon HV20 --- Please Help!
    By ksv1 in forum Movies and Video
    Replies: 4
    Last Post: 03-09-2008, 07:48 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •