Results 1 to 11 of 11
  1. #1
    File Sharing - "Snow Leopard" and Win 7

    Member Since
    Apr 19, 2011
    Location
    Virginia
    Posts
    35
    Specs:
    Early 2011 MBP i5 2.3GHz 13" 8Gb Ram 120Gb SSD
    File Sharing - "Snow Leopard" and Win 7
    I'm an experienced Windows user, but new to the Mac OS. I just spent a lot of time setting up file and folder sharing between my Win 7 Desktop and my new MacBook Pro. Seems there's a lot of research and advice out there on how to accomplish this, but I could not find any post that covered the topic thoroughly enough for someone with no prior knowledge of one of the two OS environments. Accordingly, I put together a step-by-step outline on how to accomplish Win 7 and Snow Leopard File sharing. Hope it helps someone out there.

    How to set up file sharing between a Mac OS “Snow Leopard” Computer and a Windows 7 Computer

    Notes:

    1. These instructions assume that your Mac and your Windows Computers are both password protected
    2. At certain points you may be asked to enter your Administrator’s account password in order to continue

    Mac Preparation

    1. Go to System Preferences/Sharing and put a check mark in left panel box for File Sharing
    a. Only public folder is shared by default
    b. To add additional folders to share, click the “+” sign in the Shared Folder box and choose additional folders to be shared
    c. Once folders to be shared have been selected, click on each folder to be shared and set permissions, e.g. “Read Only”, “Read & Write”, etc.
    2. After choosing folders to be shared and setting permissions, click the “Options” button in the Sharing window
    a. Check the box “share files and folders using SMB
    b. Click “Done”
    3. Click “Show All” and then click the “Network” icon
    a. Click “Advanced”
    b. Click the “Wins” tab
    c. Enter WORKGROUP on the Workgroup line
    d. No other entries are necessary in this window, so click OK.

    Windows Computer Preparation

    1. Click Start Button, right click on Computer and select “Properties”
    2. Click “Advanced System Settings” in left panel
    3. Click “Computer Name” tab
    4. If the Workgroup line does not read WORKGROUP, click the change button
    5. At the bottom of the window, click the Workgroup button and enter WORKGROUP
    6. Click OK and then OK again
    7. Click on Start Button, then Control Panel and select Network and Sharing
    a. Click on Home network under “view your active networks”
    b. Select “Work network”
    8. Exit all open windows

    Logging On To Access Shared Folders

    Windows

    1. Make sure both your Windows and Mac are turned on and you are logged into your user accounts on each system
    2. Open Explorer
    3. Double click on Network in the left panel. You should see WORKGROUP listed. Single click WORKGROUP.
    4. Enter your Windows Administrator account name and your Windows Administrator account password.
    5. Click OK. You should now be able to view your shared Mac files

    Mac

    1. Open Finder
    2. Click “Go” in the Finder menu
    3. Click “Connect to Server . . .”
    4. In the “Server Access” box, type smb:// followed by your Windows Computer Name (Example: smb://MyWindowsComputer)
    5. Click “Connect”
    6. On the next window that appears, enter the user name of your Windows computer and the password for that Windows user account.
    7. On the next window, select the volumes you want to mount (in other words, the folders you want to share)
    8. Click OK. You should now be able to view your shared Windows files.

    Limiting Windows Folders and Files to be Shared

    When you check the shared Windows Folders and Files on your Mac, you may discover that all of your Windows folders have been shared. If this is true and you want to limit what Windows files are shared with your Mac, follow the following procedure on your Windows system.

    1. Open Explorer
    2. Click Local Disk in the left panel
    3. Right Click the “Users” Folder
    4. Select “Properties” and then select the “Sharing” Tab
    5. Click “Advanced Sharing”
    6. Uncheck “Share this Folder”
    7. Click “Apply”, then Click “OK” or “Close”
    8. Navigate to each folder or file that you DO wish to share and follow the procedure outlined below for each folder or file (navigate using Explorer/Local Disk/Users, NOT using your Documents Library Folder).
    a. Right Click on the File or Folder you wish to share
    b. Select “Properties” and then select the “Sharing” Tab
    c. Click “Advanced Sharing”
    d. Check “Share this Folder”
    e. Click “Permissions”
    f. Set the Permissions you wish to allow for persons sharing this file or folder
    g. Click “Apply”, Click “Apply”, Click “Apply” or “Close”
    h. This file or folder will now be shared. Continue this procedure for other files or folders you wish to share.
    i. After you’ve finished, go to your Mac and verify that the correct folders are now shared. Note that you may have to “Eject” the shared folders and then use the “Go” and “Connect to Server” routine in Finder to see the corrected Shared Folders and Files.

    A Final Note

    At various times during the setup process and when you are using shared folders and files, you will be asked to enter a login user name and a password. Sometimes it’s not clear whether you should enter the Windows or the Mac information or the Administrator or Standard User information . There must be a pattern and logic to what’s requested, but I haven’t been using the systems long enough to discover that pattern. Just do what I do – experiment until something works and make note of it for future reference.

  2. #2
    File Sharing - "Snow Leopard" and Win 7
    Aptmunich's Avatar
    Member Since
    Mar 09, 2004
    Location
    Munich
    Posts
    9,073
    Specs:
    Aluminium Macbook 2.4 Ghz 4GB RAM, SSD 24" Samsung Display, iPhone 4, iPad 2
    Wow, very detailed post - nice job!

  3. #3
    File Sharing - "Snow Leopard" and Win 7
    IvanLasston's Avatar
    Member Since
    Feb 26, 2010
    Location
    Rocky Mountain High, Colorado
    Posts
    2,116
    Specs:
    1.8 GHz i7 MBA 11" OSX 10.8.2
    Good writeup.

    I just reinstalled my Mac and am getting everything back together. Something new happened for me - In step 2a on the Mac. I setup share using SMB and clicked OK - but when I tried getting to my Mac from windows using \\ipaddress - it never accepted my password. I believe others have had similar problems. I went back to the dialog just to see if I had SMB enabled and now there is a selection box -> On Account - so you have to pick which accounts are allowed to share on SMB. I checked the box and typed in my password and now the Windows machine can access the mac through Explorer.

    I am not sure when that check box showed up - I know when I originally setup the MBP when I first got it I never had to do that. I don't remember seeing it when I reinstalled and did my SMB setup. There is a warning about enabling SMB for users that is above that dialog box. Maybe they did that to tell users that the passwords exchange isn't as secure.

  4. #4
    File Sharing - "Snow Leopard" and Win 7

    Member Since
    Apr 19, 2011
    Location
    Virginia
    Posts
    35
    Specs:
    Early 2011 MBP i5 2.3GHz 13" 8Gb Ram 120Gb SSD
    IvanLasston . . .

    Strange. I just went back and checked and in the smb "On Account" section it does show both of my Mac User accounts, but both are unchecked. I just went over to my Windows System, clicked on WORKGROUP, entered my WINDOWS Administrator Account Name and WINDOWS Administrator Account Password and it immediately connected and showed the shared folders on my Mac. I highlighted that I had to enter my WINDOWS name and password above since logic would say that you should have to enter the Mac information. However, entering the Mac information doesn't work - at least for me.

  5. #5
    File Sharing - "Snow Leopard" and Win 7
    IvanLasston's Avatar
    Member Since
    Feb 26, 2010
    Location
    Rocky Mountain High, Colorado
    Posts
    2,116
    Specs:
    1.8 GHz i7 MBA 11" OSX 10.8.2
    Hmm - I didn't go through workgroup. My username/password is the same on both machines. Honestly your write up is what I did when I first got my Mac. After I did a clean re-install I couldn't get through to the Mac shared folders. Both times I use the \\ipaddress way of accessing the shared folders. Well selecting that has gotten it to work again.

    Thanks again for the write up

  6. #6
    File Sharing - "Snow Leopard" and Win 7
    Chris H.'s Avatar
    Member Since
    Oct 03, 2009
    Location
    Albuquerque, New Mexico
    Posts
    2,633
    Sorry for the thread hijack, but I didn't want to start a new thread (just yet).

    I have three Windows 7 PC's and three Mac computers in the house connected to the same network under the same work group. However, my Mac computers cannot see the Windows computers, and for some reason, all the Windows computers can *see my MacBook's admin folder (admin being the name I chose for the Home folder). I don't want the Windows computers to have access to the Home folder, and I've checked and double and triple checked the Sharing preference pane and it says that under File Sharing, only my Public Folder is visible. What's going on?


    *All the Windows computers can also see all the Mac computers.


    I don't want the Windows computers to prompt me for a password whenever I need to connect to the Macs:

    Mac Mini, Mac OS X 10.6.7 (Snow Leopard)
    MacBook, Mac OS X 10.6.7 (Snow Leopard)
    PowerMac G4, Mac OS X 10.4.11 (Tiger)

    I went through the Sharing pref pane and noticed that Tiger's is completely different from Snow Leopards, among countless other things in relation to network file sharing. I'm so confused.
     iPad Air 2 - iOS 9 Beta
     iPhone 6 64GB - iOS 9 Beta
     Mac mini Server M10 - OS X 10.10.5
     MacBook Uni L09 - OS X 10.11 Beta

  7. #7
    File Sharing - "Snow Leopard" and Win 7

    Member Since
    Apr 19, 2011
    Location
    Virginia
    Posts
    35
    Specs:
    Early 2011 MBP i5 2.3GHz 13" 8Gb Ram 120Gb SSD
    Regarding your Macs not seeing your Win 7 computers, have you gone through the procedure under the "Limiting Windows Folders and Files to be Shared" in my original post for each Windows system? Make sure the folders or files you want the Macs to see have the "Share this Folder" item checked off.

    Regarding your Win 7 systems seeing more than the Public Folders on your Macs, sounds like you did the right thing. I got mine to work correctly and just show the Public folders using the procedure I outlined in my post. Since I'm new to the Mac world, I'll have to defer on this issue to someone more experienced.

  8. #8
    File Sharing - "Snow Leopard" and Win 7

    Member Since
    Jul 02, 2011
    Posts
    3
    Thanks for a very thorough reply. I will give it a try when I get home.

    Cheers

    Matt

  9. #9
    File Sharing - "Snow Leopard" and Win 7

    Member Since
    Sep 19, 2011
    Posts
    2
    Great thread, but I still have a problem...
    Hi,

    I just recently bought a MacBook Air with OSX 10.7.1. I am trying to connect to my home Windows 7 workgroup. I have searched the web for about 5 days, trying all of the suggested tricks, but I still cannot get my Windows 7 desktop and MacBook Air to see each other.

    I have disabled the firewalls on both boxes, set up sharing according to the instructions above, added the workgroup "WORKGROUP" on my Windows 7 computer and added it to my Mac. When I try to "Connect to Server" I just get an error that the device may not exist. I have checked the syntax several times!

    My Windows computers can see each other just fine, and all of the computers, including the Mac can get out to the Internet. I have a Cisco access point as my wireless network device (it hangs off of a Linux box that serves as my gateway to the Internet).

    I would greatly appreciate any thoughts or suggestions on where I might go next.

    Thanks!

  10. #10
    File Sharing - "Snow Leopard" and Win 7

    Member Since
    Apr 19, 2011
    Location
    Virginia
    Posts
    35
    Specs:
    Early 2011 MBP i5 2.3GHz 13" 8Gb Ram 120Gb SSD
    My original post worked for Snow Leopard, but since I've upgraded to the Lion OS I've been unable to get my Win 7 system to see my Mac System (although the Mac DOES see the Win 7 system). Assuming you're on the Lion OS you may want to see the following web site for some suggestions.

    File Sharing Mac OS X Lion and PC Windows 7 | Mac OS X

  11. #11
    File Sharing - "Snow Leopard" and Win 7

    Member Since
    Sep 19, 2011
    Posts
    2
    Just can't see each other...
    Quote Originally Posted by Tomel View Post
    My original post worked for Snow Leopard, but since I've upgraded to the Lion OS I've been unable to get my Win 7 system to see my Mac System (although the Mac DOES see the Win 7 system). Assuming you're on the Lion OS you may want to see the following web site for some suggestions.

    File Sharing Mac OS X Lion and PC Windows 7 | Mac OS X
    Hi,

    Thanks for the pointer. The instructions are very clear, but despite having worked through them twice in detail, I still cannot get either computer to see the other. From either computer it looks like the other just doesn't exist. I cannot traceroute from one to the other, and the error messages consistently indicate that the IP address of the other computer is unreachable.

    I read somewhere that file sharing was accomplished using IPv6. If that is true, I noticed that IPv6 is disabled on my wireless access point, and that is most likely the cause of my problem. I thought it strange that this would be the case as on both systems, I am using an IPv4 address to try to get to the other machine. Does sharing use IPv6?

    Any help is greatly appreciated!

    Thanks!

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Snow Leopard and sharing and user "Staff"
    By tording in forum OS X - Operating System
    Replies: 1
    Last Post: 11-07-2011, 10:48 AM
  2. Snow Leopard SERVER and file sharing
    By markameeks in forum OS X - Operating System
    Replies: 11
    Last Post: 05-31-2011, 11:55 PM
  3. Running the latest "snow leopard" under "windows xp/VMWARE"
    By phil128 in forum OS X - Operating System
    Replies: 2
    Last Post: 11-03-2009, 08:20 PM
  4. Apple releases Leopard and Snow Leopard "Performance Update"
    By cwa107 in forum Apple Rumors and Reports
    Replies: 10
    Last Post: 10-16-2009, 03:46 PM
  5. Replies: 1
    Last Post: 07-27-2009, 05:11 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •