Mac Forums

Mac Forums (http://www.mac-forums.com/forums/)
-   Other Hardware and Peripherals (http://www.mac-forums.com/forums/other-hardware-peripherals/)
-   -   No Display after Ram Installation (http://www.mac-forums.com/forums/other-hardware-peripherals/149295-no-display-after-ram-installation.html)

kel4488 04-19-2009 03:13 AM

No Display after Ram Installation
 
I just installed 2g of RAM in the #2 slots (2 1g PC3200 400mhz 2.6v sticks) in my PPC dual 2.0 G5. Now the display isn't coming on. It is getting power because the blue indicator light comes on during startup. I removed the 2g leaving only the original 512 and still getting the same result. Has anyone had a similar problem? Could i have inadvertantly knocked the video card loose during installation?

louishen 04-19-2009 04:27 AM

Try the online guides at OWC

Mac Pro Installation Video at OtherWorldComputing.com

and ensure that the card is firmly inplace

kel4488 04-19-2009 05:31 PM

i made the video card and hard drives are secure, reinstalled the 2g and it's fine now.
thanx


All times are GMT -4. The time now is 08:35 AM.

Powered by vBulletin
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.